Hifiverse

Standlautsprecher - Verity Audio Monsalvat

Beschreibung, Bilder, technische Daten und Spezifikationen

Verity Audio Monsalvat
Bildquelle - (c) Verity Audio

Monsalvat is the reference loudspeaker system of Verity Audio, the Canadian company founded in 1995. It is a modular system rather than a single pair of speakers. A full Monsalvat System comprises two main towers, eight subwoofers, one PRO-6 processor and three Verity AMP-200 power amplifiers, and configurations with two or four subwoofers are also offered. The complete system was listed at EUR 375,000.

Key specs that matter

Each main tower carries a 50 mm pure aluminium ribbon tweeter, a 150 mm doped polypropylene midrange with a 50 mm SD-1 High Power Underhung Motor and four 280 mm doped polypropylene lower midrange drivers, each with a 50 mm SD-1 High Power Underhung Motor. Frequency range of the towers is 60 Hz - 100 kHz. Sensitivity is 99 dB (2.83 V rms/1 m, on-axis), with an impedance of 8 ohms nominal and 4 ohms minimum. Verity quotes a minimum recommended power of 5 W into 8 ohms. A main tower measures 744 x 1,207 x 1,670 mm (W x D x H) and weighs 175 kg. Every subwoofer unit contains a 381 mm woofer driver and weighs 76 kg, and a woofer tower of four units stacked vertically measures 713 x 827 x 2,286 mm.

Engineering and use context

Low frequencies come from up to eight dedicated passive subwoofers. These eight independent cabinets are corner-stackable, either vertically or horizontally, and one, two or up to four units can be used per channel, with each subwoofer or stack in its own corner. Verity bases the bass on boundary radiation combined with time delay alignment, and the company states that its subwoofer technology substantially reduces cone displacement.

At the centre of the system is the PRO-6 digital processor. It combines a preamplifier, a DAC, a digital crossover and a time-alignment device in one chassis, with ADC/DAC circuitry and total galvanic isolation between the analogue and digital domains. Digitisation takes place in real time. Monsalvat is multi-amplified and requires six channels of amplification in total, one group each for the subwoofers, the lower midrange drivers and the midrange-tweeter group. Finishes offered are black, white and wood, all under lacquer.

Pairing

The bass towers are not amplified by default. Three Verity Monsalvat AMP-200 or AMP-60 power amplifiers are the specified partners, and Verity recommends identical amplifiers on all six channels. The PRO-6 is the matching processor between source and amplifiers.

Alternatives

The Verity Audio Lohengrin IIS is another floorstanding loudspeaker in the Verity range.

Spezifikationen

  • Modellbezeichnung

    Monsalvat

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    99

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    >5

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    74.4 x 120.7 x 167.0 (Main) 71.3 x 82.7 x 228.6 (Woofer)

  • Gewicht (kg)

    175 (Main) + 76 (one bass module)

  • Offizieller Link

Weitere Komponenten