Arindal is a two-cabinet floorstanding loudspeaker from Verity Audio, the Canadian company founded in 1995. It was presented at High End 2022 in Munich, held from 19 to 22 May, and its owner's manual, release 1.0, is dated August 2022. Verity describes it as a full bandwidth three-way bass-reflex design for moderate to large rooms.
Key specs that matter
Its driver complement is a 25 mm double neo ring soft dome tweeter, a 150 mm doped polypropylene midrange with a 50 mm SD-1 High Power Underhung Motor and a 241 mm carbon-paper sandwich cone woofer with a 76 mm SD-1 High Power Underhung Motor. Bandwidth is 20 Hz - 50 kHz (3.0 dB). Sensitivity is 93 dB (2.83 V rms/1 m, on-axis), and impedance is 8 ohms nominal, 3 ohms minimum at 5.5 kHz. Verity quotes a minimum recommended power of 7 W into 8 ohms and power handling of 250 W music power. Overall dimensions are 323 x 450 x 1,208 mm (W x D x H), and a pair weighs 126 kg.
Engineering and use context
In the upper cabinet, the tweeter and midrange are combined with a damped open-back acoustic filter. The midrange uses a special-geometry, mineral-filled polypropylene cone, while the woofer cone is a multilayer carbon and paper amalgam. Verity specifies a rear-oriented woofer with bass-reflex tuning, and every driver has a ventilation system to minimise voice-coil dynamic compression. Between the two cabinets is a 25 mm aluminium plate with dampers, coupled through special elastomers.
Under the lower cabinet sits MASIS, the Mechanical & Airborne Sound Isolation System. This base is a shell containing special materials that act as an acoustic resonator and filter, and it rests on four cushioned knurled feet adjusted by hand. A first-order slope is used between woofer and midrange and a third-order slope between midrange and tweeter, with all crossover components computer-matched and indexed. According to Verity, the internal bracing breaks a wall resonance into multiple higher-frequency resonances that are not harmonically related, and the panels are cut on computer-controlled tooling. Break-in time is 75 hours to 63% and 400 hours to 99%. Finishes are high-gloss black or white lacquer and Makore in high-gloss or hand-oiled form, and a five-year limited warranty applies.
Pairing
On tube amplifiers with multiple output taps, Verity specifies the 8-ohm taps. Input power must not exceed 150 W rms (30 V rms). The Furutech binding posts accept banana plugs, spade connectors or bare wire, and spades are the recommended termination.
Alternatives
The Verity Audio Otello is a smaller floorstanding loudspeaker with two 178 mm woofers.