The M9 is a four-way, six-driver floorstanding loudspeaker in Magico's M Series. Magico describes its enclosure as the first loudspeaker cabinet to combine inner and outer skins of carbon fiber with an aluminium honeycomb core. Every pair comes with the MXO, an analogue outboard active crossover designed in-house for the split between the bass and mid-bass drivers.
Key specs that matter
Drive units are one 28 mm diamond-coated beryllium dome tweeter, one 152 mm midrange, two 279 mm mid-bass drivers and two 381 mm bass drivers, all cones being Gen 8 Nano-Tec with an aluminium honeycomb core. Sensitivity is 94 dB and nominal impedance is 4 ohms. Frequency response is 18 Hz - 50 kHz. Power handling is 20 W (min.) to 2000 W (max.). The bass to mid-bass crossover frequency is 120 Hz with 24 dB per octave Linkwitz-Riley slopes. Each loudspeaker measures 203 x 102 x 74 cm (H x D x W) and weighs 454 kg. The MXO and its power supply are separate chassis of 20 x 46 x 51 cm each, weighing 18 kg and 27 kg.
Engineering and use context
Magico states that the carbon fiber and honeycomb construction doubles structural stiffness at lower weight. It also has constrained-layer damping with aerospace composites, a baffle of 6061 T6 aircraft aluminium and front-to-back tensioning rods. Finite Element Analysis was used to calibrate the shape against resonances.
Its tweeter dome is beryllium with diamond applied by chemical vapour deposition. Each cone is an eighth-generation Nano-Tec design with an aluminium honeycomb core between graphene/carbon fiber skins, and 12,000 kg of pressure is required to shape the 381 mm cones. Voice coils are vented, formed of pure titanium and 76, 102 and 127 mm in diameter. Underhung voice coils sit in motors with neodymium ring magnets and a matching second magnet on top. Each mid-bass driver has an N48H neodymium ring magnet of 120 x 8 mm, and the bass drivers have a 36 mm air gap for ±15 mm linear excursion.
Inside the MXO is a fully balanced, discrete circuit with Linkwitz-Riley filters and precision step attenuators in 0.5 dB steps for each output. Its external power supply regenerates AC and applies active regulation to the circuitry. Tweeter, midrange and mid-bass are crossed over by a three-way passive network with 24 dB per octave Linkwitz-Riley acoustic targets and Magico's elliptical symmetry design.
Pairing
A pair of M9 requires two stereo or four monaural power amplifiers. Bass drivers and the passive three-way section are driven by separate amplifier channels through the MXO.
Alternatives
The M7 is the smaller M Series floorstanding loudspeaker, with 229 mm mid-bass and 305 mm bass drivers and a weight of 239 kg.