Hifiverse

Standlautsprecher - Magico A3 2027

Beschreibung, Bilder, technische Daten und Spezifikationen

Magico A3 2027
Bildquelle - (c) Magico

The A3 2027 is a rebuilt version of the A3 floorstanding speaker from Magico of Hayward, California, announced in October 2026 with deliveries planned for the first quarter of 2027. The original A3 was announced in December 2017 at USD 9,800 per pair, and for the new model Magico replaced every driver and redesigned the enclosure, the crossover and the footers. The US price is USD 25,000 per pair.

Key specs that matter

Sealed and three-way, the A3 2027 has four drivers - a 28 mm pure beryllium dome tweeter, one midrange unit and two 7 inch woofers. Magico gives a sensitivity of 87 dB, a nominal impedance of 4 ohm and a frequency range of 25 Hz to 50 kHz. Amplifiers are recommended from a minimum of 50 W to a maximum of 300 W per channel. Each cabinet is 109.5 cm tall, 23.5 cm wide and 28 cm deep and weighs 59.4 kg. The bead-blasted, anodised aluminium panels come in black, silver, red or blue.

Engineering and use context

Magico gave the tweeter a revised diaphragm geometry, a neodymium motor, longer linear voice-coil travel and a redesigned rear chamber. The midrange and both woofers use cones with an aluminium honeycomb core between carbon fibre skins, and their new motors carry pure titanium voice coils and copper shorting rings. The crossover follows Magico's Elliptical Symmetry Crossover approach, aims at a 24 dB per octave Linkwitz-Riley acoustic slope and uses Mundorf parts from Germany. Magico says the network improves phase and frequency integration between the drivers, controls driver resonances and lowers intermodulation distortion. The aluminium enclosure uses constrained-layer damping and revised internal bracing, with radiused vertical edges, a newly machined base and footers made for this model. During development the engineers measured panel resonances with a laser vibrometer and used a Near-Field Scanner, the same tools applied to the M9. Against the first A3 the new speaker is slightly shorter and about 9 kg heavier, and its sensitivity is 1 dB lower.

Pairing

A sealed 4 ohm load of moderate efficiency is best driven by transistor amplification that stays stable into low impedances, and the wide recommended power window covers integrated amplifiers as well as larger stereo or mono power amplifiers. Owners who want more low-end extension can add the Magico ASUB, the powered subwoofer the company made for its A Series speakers.

Alternatives

The Magico A5 is the larger floorstanding speaker of the A Series, with a 127 mm midrange and three 229 mm woofers in a sealed enclosure.

Spezifikationen

  • Modellbezeichnung

    A3 2027

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    109.5 x 23.5 × 28.0

  • Gewicht (kg)

    59.4

  • Offizieller Link

    N/A

Weitere Komponenten