The F501SP is the Special Production version of the F501, a 2.5-way floorstanding loudspeaker from Fyne Audio built in the UK. It uses technology developed for the F700 Series, an upgraded crossover for the F501 cabinet and an aluminium sandwich plinth for the BassTrax porting system. Its aluminium driver chassis has diamond machine cut detailing, and the plinth is anodised machined aluminium. Finishes are Natural Walnut, Piano Gloss Walnut real wood veneer, Piano Gloss Black and Piano Gloss White. UK price is GBP 3,799.99 - 4,369.99 per pair including VAT.
Key specs that matter
System type is 2.5 way, with a downwards port, a BassTrax Tractrix diffuser and a twin cavity loading system. Drive units are a 150 mm IsoFlare point source driver, with a multi-fibre bass/midrange cone, FyneFlute surround and 25 mm magnesium dome compression tweeter on a neodymium magnet system, plus a 150 mm multi-fibre bass cone with FyneFlute surround. Crossover frequencies are 250 Hz and 1.7 kHz. Sensitivity is 91 dB (2.83 V/1 m) and nominal impedance is 8 ohms. Frequency response is 36 Hz - 34 kHz (-6 dB typical in room). Recommended amplifier power is 30 - 180 W RMS, and power handling is 80 W RMS continuous and 360 W peak. Dimensions are 984 x 288 x 320 mm (H x W x D) including terminals, grille and plinth, and net weight is 21.0 kg.
Engineering and use context
IsoFlare, developed under the direction of Dr Paul Mills, mounts the tweeter within the bass/mid cone, and the two share a common centre. FyneFlute is a computer-designed variable geometry surround with a fluted profile that forms a non-homogeneous termination boundary around the cone.
Its crossover is a bi-wired passive low loss network, 2nd order low pass and 1st order high pass, with Cryo-Lite treated parts. A fifth terminal on the connection panel grounds the driver chassis against RF interference. Under the cabinet, the Tractrix diffuser converts the port output into an expanding 360-degree wavefront, and BassTrax is patented by Fyne Audio. Cabinets are High Density Fibreboard with extensive internal bracing.
Four carpet spikes with adjustment thumb wheels thread into the plinth and are levelled from above with the supplied hex key, and cups are included for wooden floors. Magnetic grilles can be stored on the rear of the speaker.
Pairing
The terminals allow single wiring with the link bars in place or bi-wiring without them. An optional earth wire connects the fifth terminal to the ground terminal of the amplifier.
Alternatives
The F502SP is the larger floorstanding model of the F500SP series, with 200 mm drivers and 92 dB sensitivity.