Hifiverse

Standlautsprecher - Fyne Audio F501

Beschreibung, Bilder, technische Daten und Spezifikationen

Fyne Audio F501
Bildquelle - (c) Fyne Audio

The F501 is the smaller of the two floorstanding loudspeakers in the Fyne Audio F500 series, now listed as discontinued. Fyne Audio was founded by former Tannoy engineers, and the F500 series uses the company's IsoFlare point source drive unit, refined by a team under Technical Director Dr Paul Mills. Its compact cabinet is intended for small to medium-sized rooms. UK pricing was GBP 1,699.99 - 1,869.98 per pair depending on finish.

Key specs that matter

System type is 2.5-way twin cavity coupled reflex with a downwards-firing port and BassTrax Tractrix diffuser. Drive units are one 150 mm IsoFlare multi-fibre bass/mid with a 25 mm titanium dome compression tweeter, and one 150 mm multi-fibre bass driver. Crossover frequencies are 250 Hz and 1.7 kHz, with a 2nd order low pass and 1st order high pass. Frequency response is 36 Hz - 34 kHz (-6 dB, typical in room). Sensitivity is 90 dB (2.83 V/1 m) into a nominal 8 ohms, and recommended amplifier power is 35 - 150 W RMS. Dimensions are 984 x 270 x 318 mm (H x W x D) including grille, terminals and plinth but excluding spikes, and net weight is 18.9 kg.

Engineering and use context

According to Fyne Audio, IsoFlare gives constant directivity of the wave front, with isotropic energy radiation from a point source. Its titanium HF diaphragm moves break-up modes above the range of human hearing, a vented rear chamber in the neodymium HF magnet places the low frequency resonance well below the crossover region, and the waveguide geometry avoids internal reflections. Both drivers use multifibre paper cones with a fluted rubber surround on a rigid cast aluminium chassis.

Below the internal port, the Tractrix profile diffuser converts plane wave port energy into a spherical 360-degree wave front. A rigid MDF cabinet with a gently curved front and rear baffle sits on an MDF plinth with top-adjustable spikes. Crossovers use low-loss laminated core inductors and polypropylene capacitors. Finishes are Dark Oak or Black Oak real wood veneer, Piano Gloss Black and Piano Gloss White.

Pairing

An amplifier rated for 8 ohm loads is required. The matching centre speaker is the F500C.

Alternatives

The F502 is the larger floorstanding speaker in the F500 series.

Spezifikationen

  • Modellbezeichnung

    F501

  • Untere Grenzfrequenz +/- 3dB (Hz)

    36

  • Obere Grenzfrequenz +/- 3dB (Hz)

    34 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    35- 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    98.4 x 27.0 x 31.8

  • Gewicht (kg)

    18.9

  • Offizieller Link