Hifiverse

Standlautsprecher - Monitor Audio Bronze 500

Beschreibung, Bilder, technische Daten und Spezifikationen

Monitor Audio Bronze 500
Bildquelle - (c) Monitor Audio

The Bronze 500 is a floorstanding speaker of Monitor Audio's sixth-generation Bronze Series, launched in 2020 and now shown among the company's discontinued ranges. Monitor Audio calls it the flagship of the range. The German list price was EUR 1,095 per pair. Four finishes were offered - Black, White, Walnut and Urban Grey.

Key specs that matter

System format is 2.5-way bass reflex with a Dual HiVe II port system. Two 203 mm C-CAM mid/bass drivers and one 25 mm C-CAM Gold dome tweeter with UD (Uniform Dispersion) Waveguide make up the driver complement. Crossover frequencies are 550 Hz and 2.7 kHz. Frequency response is 41 Hz - 25 kHz (-6 dB, free field) and 32 Hz - 30 kHz (-6 dB, in room). Sensitivity is 90 dB (2.83 V/1 m), and nominal impedance is 8 ohms (min. 4.1 ohms). Power handling is 200 W RMS, recommended amplifier power is 60 - 200 W, and maximum SPL is 116 dBA (pair). Dimensions are 951 x 231 x 325 mm (H x W x D) including grille and terminals, or 974 x 294 x 364 mm with feet and spikes. Weight is 18 kg.

Engineering and use context

Both mid/bass drivers were newly designed for the 6G generation, with revised chassis geometry, a conical diaphragm and DCM (Damped Concentric Mode) technology. According to Monitor Audio, DCM gives a more accurate time response. In front of the gold dome sits an acoustically transparent hexagonal tweeter grille.

Cabinet walls are 15 mm MDF with internal bracing, and the painted front baffle is 21 mm thick. Each driver is mounted with Single Bolt Through technology, credited by the company with higher rigidity, stability and better decoupling of the driver from the baffle. Inside the crossover are custom polyester film and electrolytic capacitors, air-core inductors and low-loss laminated steel-core inductors. Internal wiring is silver-plated oxygen-free Pureflow copper, and the gold-plated terminals allow bi-wiring. Its two HiVe II ports are shaped for a more even air flow. Steel outrigger feet come with spikes for carpet and rubber feet for hard floors.

Pairing

An amplifier stable into 4 ohms is required. The matching centre speaker of the series is the Bronze C150, and the matching subwoofer is the Bronze W10.

Alternatives

Below it in the 6G line-up sits the Bronze 200, a 2.5-way floorstanding speaker with two 140 mm C-CAM drivers, 88 dB sensitivity and a weight of 12.8 kg.

Spezifikationen

  • Modellbezeichnung

    Bronze 500

  • Untere Grenzfrequenz +/- 3dB (Hz)

    32 (-6 dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30000 (-6 dB)

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    60 - 200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    95.1 × 23.1 × 32.5

  • Gewicht (kg)

    18

  • Offizieller Link