Hifiverse

Standlautsprecher - B&W (Bowers & Wilkins) 704 S3

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) 704 S3
Bildquelle - (c) B&W (Bowers & Wilkins)

The 704 S3 is a three-way floorstanding loudspeaker in the 700 Series from Bowers & Wilkins, and the company calls it the slimmest tower it makes. Its range sits below the 800 Series Diamond. Two Aerofoil Profile bass drivers sit below a decoupled Continuum cone FST midrange, and the US price is USD 4,500 per pair.

Key specs that matter

Description is a 3-way vented-box system. Drive units are one 25 mm (1 in) Decoupled Carbon Dome high-frequency unit, one 130 mm (5 in) Continuum cone FST midrange and two 130 mm (5 in) Aerofoil profile bass units. Frequency range is 43 Hz - 33 kHz, and frequency response is 48 Hz - 28 kHz (±3 dB from reference axis). Sensitivity is 88 dB (on axis, 2.83 Vrms/1 m). Harmonic distortion (2nd and 3rd harmonics, 90 dB, 1 m on axis) is below 1% from 100 Hz to 22 kHz and below 0.5% from 300 Hz to 20 kHz. Nominal impedance is 8 ohms (min. 3.1 ohms). Recommended amplifier power is 30 - 150 W into 8 ohms on unclipped programme, and maximum recommended cable impedance is 0.1 ohm. Dimensions are 964 x 252 x 321 mm (H x W x D) including tweeter and plinth, with a cabinet of 925 x 165 x 263 mm. Net weight is 20.53 kg.

Engineering and use context

Bowers & Wilkins developed the Carbon Dome tweeter for the 700 Series to replace the aluminium double dome, and it raises the breakup threshold to 47 kHz. As in every three-way model of the series, the dedicated midrange combines four technologies - the Continuum cone, FST, Biomimetic Suspension and midrange decoupling. Decoupling keeps interference from the bass drivers to a minimum. Thanks to its composite construction, the Continuum cone avoids the abrupt transitions in behaviour of a conventional drive unit.

Each Aerofoil Profile bass cone has a variable thickness, with stiffness where it is needed most, and was developed with computer modelling. Its cabinet is reflex-loaded through a Flowport. The 704 S3 is intended for floor mounting only, and the supplied plinth must always be used, with spike or rubber feet screwed into it. Foam plugs are included for the port.

Two linked pairs of terminals are mounted on the back. Cabinet finishes are Gloss Black, Satin White, Mocha and Rosenut (APAC only), with black grilles and a grey option for Satin White.

Pairing

An amplifier stable into loads near 3 ohms is required. Speaker cable has to stay within the maximum recommended impedance. With the links removed, the terminals allow bi-wiring or bi-amplification.

Alternatives

The 703 S3 is a larger three-way floorstanding model in the 700 Series, with a 150 mm Continuum cone FST midrange and two 165 mm Aerofoil profile bass units.

Spezifikationen