The 603 S3 is a three-way floorstanding loudspeaker and, according to Bowers & Wilkins, the largest model in the 600 Series. It belongs to the eighth generation of the range, which went on sale on 23 August 2023. Launch price was USD 2,500 per pair, and the current US list price is USD 2,700 per pair.
Key specs that matter
The system is a 3-way vented-box design. Drive units are a 25 mm Titanium Dome high-frequency unit, a 150 mm Continuum cone FST midrange and two 165 mm paper cone bass units. Frequency range is 29 Hz - 33 kHz (-6 dB), and frequency response is 46 Hz - 28 kHz (±3 dB from reference axis). Sensitivity is 90 dB (on axis, 2.83 Vrms, 1 m). Harmonic distortion (2nd and 3rd harmonics, 90 dB, 1 m on axis) is below 1% from 100 Hz to 22 kHz and below 0.5% from 350 Hz to 12 kHz. Nominal impedance is 8 ohms (min. 3.0 ohms). Recommended amplifier power is 30 - 200 W into 8 ohms on unclipped programme, with a maximum cable impedance of 0.1 ohm. Height is 985 mm, or 1,020 mm with the plinth. Width is 190 mm, or 260 mm with the plinth, and depth is 340 mm, 368 mm with grille and terminals, or 402 mm with the plinth. Net weight is 27.5 kg.
Engineering and use context
Its Titanium Dome tweeter has a 25 micron main dome braced by a second 30 micron titanium ring. Behind the dome sits a significantly elongated tube-loading system, and the tweeter grille is the more open design taken from the 800 Series Signature.
The midrange uses a 700 Series S3 motor assembly, and the paper cone bass drivers have 703 S3 motor systems. In the FST midrange, the Continuum cone has a composite construction that avoids the abrupt transitions in behaviour of a conventional drive unit. Its crossover has upgraded bypass capacitors from the 700 Series S3.
Inside the cabinet, the internal bracing is made from a higher standard of wood. Intersecting trim rings bring the drivers closer together on the baffle, and the port is a Flowport. A new terminal tray, also from the 700 Series S3, carries two linked pairs of terminals. The 603 S3 is intended for floor mounting only, always on its supplied plinth with spike or rubber feet. Finishes are Black, White and Oak, with Red Cherry in APAC markets only.
Pairing
An amplifier stable down to 3 ohms within the recommended power range is required. With the links removed, the terminals allow bi-wiring or bi-amplification.
Alternatives
The Bowers & Wilkins 704 S3 is the slim floorstanding speaker of the 700 Series S3, with a Decoupled Carbon Dome tweeter.