Hifiverse

Standlautsprecher - Linn 360 Passive with Active Bass

Beschreibung, Bilder, technische Daten und Spezifikationen

Linn 360 Passive with Active Bass
Bildquelle - (c) Linn

Linn's 360 Passive with Active Bass, or PWAB, is a four-way floorstanding loudspeaker introduced in April 2023 as the separates variant of the 360. Its upper three sections are driven by an external amplifier, while the two lower bass units have built-in Power DAC amplification. Linn pairs it with two Klimax Solo amplifiers and offers a later conversion to Exakt operation with a Klimax Exaktbox and six channels of Klimax Solo. In Australia the pair is priced at AUD 149,995.

Key specs that matter

Drive units are a 19 mm thin-ply woven carbon dome tweeter, a 64 mm thin-ply woven carbon dome midrange, a 190 mm aluminium/magnesium cone upper bass unit and two 220 mm long-throw aluminium cone woofers. On units built before September 2024 (serial no. 1615037) the tweeter has a beryllium dome, and the protective grille must stay in place. Efficiency is 87 dB for 1 W at 1 m. Frequency response is 20 Hz - 28 kHz (±2 dB), and the bass system has two 500 W Power DAC amplifiers. With stand, each 60-litre cabinet measures 411 x 1141 x 484 mm (W x H x D) and weighs 66.4 kg.

Engineering and use context

Tweeter, midrange and upper bass run through a three-way analogue crossover that Linn calls ultra-low-resonance, with 4 mm terminals for each section. According to Linn, the compact bass system needs electronic compensation to reach an extended response, and this cannot be implemented passively. The incoming analogue bass signal is therefore digitised and passed to the Power DAC. A FEED switch selects its source - INT takes a floating balanced feed from the upper bass terminals and works with class D amplifiers, while XLR takes the balanced line-level input, which Linn rates as the better option. With the XLR feed, a GAIN control matches the bass to the external amplifier, and most Linn power amplifiers have a gain of 28.6 dB. For INT it is set to zero.

Klimax Solo amplifiers cannot replace the internal bass amplifiers, as the bass extension needs more power and voltage gain than a Klimax Solo provides. A removable plate covers the Exakt sockets, which take no part in PWAB playback and are used only for external Exakt operation and software updates. Because the active bass has its own ExaktEngine, one 6-channel Exaktbox drives a pair of 360 Arrays. Linn-designed upper bass and woofer units with the Pistonik motor system are fitted as standard.

Pairing

A stereo power amplifier or integrated amplifier is required for the upper three sections. The matching power amplifiers are a pair of Linn Klimax Solo. A source with a balanced XLR line output allows the XLR feed for the Power DAC.

Alternatives

The Linn 360 Exakt Integrated uses the same cabinet and drive units with an Exakt digital crossover and built-in amplification for all sections.

Spezifikationen

  • Modellbezeichnung

    360 Passive with Active Bass

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    41.1 × 114.1 × 48.4

  • Gewicht (kg)

    70

  • Offizieller Link

Weitere Komponenten