Hifiverse

Standlautsprecher - Linn 150

Beschreibung, Bilder, technische Daten und Spezifikationen

Linn 150
Bildquelle - (c) Linn

The 150 is a three-way passive floorstanding loudspeaker from Linn of Glasgow, introduced in September 2024. In the current Linn speaker range it sits between the 119 bookshelf model and the flagship 360, and the US price starts at USD 7,805. Its 3-way drive unit layout allows a later upgrade from passive operation to Linn's Exakt technology.

Key specs that matter

Drive units are a 19.55 mm soft Sonomex dome tweeter with a large ferrite magnet and a voice coil in ferrofluid, a 160 mm midrange and a 190 mm bass unit. Both cone units have a Nextel-coated paper diaphragm and a large ferrite magnet motor system with high linear excursion. Frequency response is 38 Hz to >20 kHz (±3 dB), sensitivity is 86 dB, and nominal impedance is 4 ohms. Operating volume is 40 litres. Bass loading uses dual down-firing ports, and the rear carries three pairs of binding posts. Cabinet dimensions are 939 x 210 x 297 mm (H x W x D), overall dimensions are 1000 x 234 x 321 mm, and weight is 21.56 kg each. Finishes are Walnut, Oak, Satin Black and Satin White.

Engineering and use context

Linn states that the down-ported design gives omnidirectional bass. Drawing on the development of the 360, the drive units are mounted at the very front of the baffle with no grille, to minimise occlusion and improve excursion. In passive form the 150 uses an analogue, lower-order passive crossover designed for signal purity. A magnet-mounted trim piece has fine concentric grooves like the surface of a vinyl record, and an electro-formed Linn logo is the tweeter guard. An optional aluminium upgrade plinth became available in 2025.

For Exakt operation the passive crossover is bypassed, and according to Linn the conversion takes a matter of minutes. The converted speaker connects either to an Exaktbox or to a Selekt DSM with three cartridges and three DACs, and the amplification, DAC modules and Exakt digital crossover can all be housed in the Selekt DSM. None of the older Aktiv crossover cards for Linn power amplifiers are available for this model.

Pairing

For single wiring the link bars stay fitted between the three pairs of binding posts. With the link bars removed the terminals allow tri-wiring from one amplifier output. An amplifier stable into 4 ohms is required. The matching Linn system is the Selekt DSM Classic Hub, upgradable from passive to Exakt with more internal amplification.

Alternatives

Within Linn's floorstanding range the step above is the flagship 360.

Spezifikationen

  • Modellbezeichnung

    150

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    23.4 × 100.0 × 32.1

  • Gewicht (kg)

    21.56

  • Offizieller Link