Hifiverse

Regallautsprecher - Kanto Audio YUP6

Beschreibung, Bilder, technische Daten und Spezifikationen

Kanto Audio YUP6
Bildquelle - (c) Kanto Audio

The YUP6 is the larger of Kanto's two YU Passive bookshelf speakers, a compact two-way design for listeners who want to choose their own amplifier rather than buy Kanto's powered models. It shares its cabinet styling with the brand's active YU range, but leaves amplification, source selection and upgrades entirely to the rest of the system, so it can work on a desk, in a living room or in a home theatre.

Key specs that matter

Each speaker pairs a 5.25-inch Kevlar woofer with a 1-inch silk dome tweeter. Frequency response is 50 Hz to 20 kHz, sensitivity is 89 dB (2.83 V/1 m) and nominal impedance is 6 ohm, with power handling of up to 100 W per speaker. The cabinet measures 17.5 x 20.5 x 27.2 cm and weighs 4 kg, and the speakers are sold in pairs in black or white matte finishes.

Engineering and use context

Kevlar is used for the woofer cone because it combines low mass with high stiffness, which limits cone break-up and keeps distortion low as the driver moves harder. The silk tweeter is a soft dome intended for wide dispersion rather than a narrow beam. The cabinets are built from acoustic-grade MDF and rear-ported, with the port tuned to extend bass output below what a sealed box of the same size would reach. A threaded 1/4-inch-20 insert in the base lets each speaker bolt directly onto compatible Kanto stands, which fixes it in place and couples it to the stand to reduce cabinet resonance. Knurled binding posts accept bare wire, spades or banana plugs, and self-adhesive feet are included for shelf or desk placement. As a passive design, the YUP6 has no built-in amplifier or streaming module that could become outdated.

Pairing

The benign load and good sensitivity make the YUP6 easy to drive for most integrated amplifiers, stereo receivers or home cinema receivers, as long as the amplifier stays within the rated power handling. On a desk, a compact DAC/amplifier combination is enough, while in a home cinema the pair can serve as rear, side or height channels. The rear port calls for a little space behind the cabinet when placed on a shelf. Adding a subwoofer extends the system below the lower limit of the cabinet.

Alternatives

The Kanto YUP4 is the smaller passive model in the same range, suited to tighter desks.

Spezifikationen

  • Modellbezeichnung

    YUP6

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    100

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    17.5 x 20.5 x 27.2

  • Gewicht (kg)

    4

  • Offizieller Link

Weitere Komponenten