The YU2 is the smallest powered speaker pair of the first-generation YU series from Kanto, a company in Coquitlam, British Columbia, that designs its products in Canada. Kanto calls it a desktop mini-monitor and specifies it for desktop or bookshelf use in a near-field computer setup, though it also works as a stand-alone stereo system. Its price was USD 269.99 per pair, and the finishes were matte black, matte white, bamboo and walnut. This generation is now discontinued.
Key specs that matter
Each speaker has a 19 mm silk dome tweeter and a 76 mm composite woofer, with a 2-way crossover at 2.5 kHz. Amplifier type is class D, rated at 25 W RMS per channel into 4 ohms, or 100 W peak power (50 W total RMS). Sensitivity is 84 dB (2.83 V/1 m). Frequency response is 80 Hz - 20 kHz (±6 dB). Input sensitivity is 550 mV and total harmonic distortion is below 0.1%. Inputs are 1 x 3.5 mm stereo mini-jack AUX and 1 x USB audio, plus one subwoofer output. Each speaker measures 100 x 150 x 135 mm (W x H x D), and net weight is 1.4 kg for the active speaker and 1.3 kg for the passive one.
Engineering and use context
All electronics sit in the active left speaker. Its right channel output terminals are knurled five-way binding posts, and the supplied speaker wire connects them to the passive right speaker. The USB input is a USB-B socket with an internal DAC that supports data streams up to 16-bit/48 kHz, and on the computer the output device is set to USB Audio DAC. According to Kanto, the rear bass reflex port is tuned to eliminate port turbulence.
On the rear panel, the ON/OFF switch and volume control are combined in one knob, and a status LED is on the front. An external AC/DC adapter rated for AC 100 - 240 V, 50/60 Hz is the power supply, with standby consumption below 0.5 W. Kanto includes a USB cable, a 3.5 mm AUX cable, about 3 m of speaker wire and eight self-adhesive rubber feet. Warranty cover is 24 months.
Pairing
This system must not be connected to the speaker outputs of a stereo amplifier. Line-level sources with RCA outputs require a stereo RCA to 3.5 mm cable, and a turntable requires a built-in or external phono preamp. Its mono subwoofer output matches the Kanto sub6 and sub8. For longer runs between the two speakers Kanto recommends a heavier gauge of speaker cable.
Alternatives
The Kanto YU4 is a larger powered two-way pair from the same series, with 102 mm Kevlar woofers, Bluetooth and a phono preamp.