Hifiverse

Regallautsprecher - KRK Systems V6 Series 4

Beschreibung, Bilder, technische Daten und Spezifikationen

KRK Systems V6 Series 4
Bildquelle - (c) KRK Systems

The V6 Series 4 is the middle model of the fourth-generation V Series from KRK Systems, a family of powered near-field monitors introduced in 2016. KRK defines it as a two-way, full-range studio reference monitor for recording, mixing and mastering. Its launch price was USD 599 per unit.

Key specs that matter

Low frequencies come from a 165 mm woven Kevlar woofer with a cast aluminium frame and a ferrite magnet, and high frequencies from a 25 mm Kevlar dome tweeter with a ferrite magnet. Both are custom designed by KRK. Crossover frequency is 1.6 kHz. Frequency response is 49 Hz - 19 kHz (±3 dB), and frequency range is 40 Hz - 24 kHz (-10 dB). Two dedicated class D amplifiers deliver 125 W LF and 30 W HF, 155 W in total. Peak SPL is 115 dB. Connection is through a balanced 10 kohm XLR / 6.35 mm combo input, and mains power through an IEC inlet. Each monitor measures 353 x 231 x 288 mm (H x W x D) and weighs 9.4 kg.

Engineering and use context

An MDF body is combined with a solid aluminium front baffle, and the bass reflex port is on the front. Underneath, an EVA foam cushion works with the cast-aluminium front as a built-in stabiliser. KRK states that it reduces the recoil of the woofer, and the foam keeps the monitor in place and isolates it from the desk.

Rear selectors cover ground lift, input sensitivity, standby and the logo LED with a dim setting. A separate level attenuation control lowers output in 0.5 dB steps by up to 3 dB for level matching with other monitors. Input sensitivity works as a pad, not as a volume control, and the V6 ships at -10 dBV. KRK compares the V6 at +4 dBu with the 98 W, 107 dB SPL ROKIT 6 at -10 dBV and notes that the V6 goes louder before reaching its limiter.

After switch-on or wake-up from standby there is a 3-second delay before the logo lights, and signal reaches the drivers a second later. Standby engages after 30 minutes without signal, and the logo pulses to show it. Protection circuitry covers AC power surges, amplifier overdrive and overheating, and after a thermal shutdown the back plate needs about 30 minutes to cool before restart. A USB jack is reserved for future updates, and threaded points accept wall-mounting brackets. The box holds a power cable, a custom KRK adjustment key and an optional protective grille with screws, intended for mobile broadcast use.

Pairing

A balanced line-level source with XLR or TRS output is required - an audio interface, mixing console or monitor controller. KRK specifies the +4 dBu setting for most professional equipment.

Alternatives

The V8 Series 4 is the larger model of the series, with a 203 mm woven Kevlar woofer, 200 W on the LF channel and response down to 35 Hz (±3 dB).

Spezifikationen

  • Modellbezeichnung

    V6 Series 4

  • Untere Grenzfrequenz +/- 3dB (Hz)

    49

  • Obere Grenzfrequenz +/- 3dB (Hz)

    19 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    155

  • Größe (sm)

    35.3 x 23.1 x 28.8

  • Gewicht (kg)

    9.4

  • Offizieller Link

Weitere Komponenten