The SPEKTOR 1 is an ultra-compact passive two-way loudspeaker from DALI's SPEKTOR range, with which the Danish company brought its sound design principles to a lower price bracket. It debuted on 30 January 2017, was produced in China and now appears among DALI's discontinued models. DALI intended it for a shelf, a wall or a stand, in a compact hi-fi system or in a surround setup. Vinyl finishes were white, black ash and walnut.
Key specs that matter
Frequency range is 59 Hz - 26 kHz (±3 dB). Sensitivity is 83 dB (2.83 V/1 m), nominal impedance is 6 ohms and maximum SPL is 103 dB at 1 m. A single 2-way crossover at 2.1 kHz splits the signal between one 114 mm woofer and one 21 mm soft dome tweeter in a ported cabinet. Recommended amplifier power is 40 - 100 W.
Engineering and use context
DALI developed the woofer specifically for this speaker. Both the angle of its wood fibre cone and the size of the dust cap were optimised for integration with the tweeter and for dispersion. The cone membrane is a mix of fine-grain paper and wood fibre pulp, rigid and lightweight, and its uneven structure helps minimise surface resonances.
Its tweeter dome is made of ultra-lightweight woven fabric. At 0.056 mg per mm2, the material weighs less than half as much as most other soft dome tweeters, according to DALI. The dome reproduces even the lowest part of its high frequency range without breakup.
Driver materials and geometry are purpose-designed for a wide dispersion pattern. SPEKTOR speakers use only DALI designed, custom built drivers and crossovers. DALI states that these custom drivers eliminate the need for crossover frequency correction, for a signal loss close to zero.
Pairing
DALI calls the design amplifier friendly and names almost any stereo amplifier or surround receiver in its price category as a match. An amplifier rated for 6 ohm loads within the recommended power range is required.
Alternatives
The SPEKTOR 2 is the larger bookshelf speaker of the same DALI series.