Hifiverse

Regallautsprecher - ATC SCM20ASL Pro

Beschreibung, Bilder, technische Daten und Spezifikationen

ATC SCM20ASL Pro
Bildquelle - (c) ATC

The SCM20ASL Pro is a compact two-way active studio monitor from ATC (Acoustic Transducer Co.), the British loudspeaker and electronics maker based in Stroud, Gloucestershire. ATC lists it for critical near-field listening in all control rooms, for LCR surround monitoring in small-to-medium control rooms and for surround channels in medium-to-large control rooms. The current version is the SCM20ASL Pro (V2), and the SCM20 Pro series also includes the passive SCM20PSL Pro with a bi-wire connection panel.

Key specs that matter

ATC's own 150 mm Super Linear driver with a 75 mm voice coil (SB75-150SL, 8 ohms) is the mid/bass unit. The tweeter is a 25 mm dual suspension soft dome (SH25-76S, 6 ohms). A discrete MOSFET class A/B bi-amp pack is rated at 200 W continuous for the LF amplifier and 50 W continuous for the HF amplifier (1% THD). Crossover frequency is 2.2 kHz, with 2nd order (12 dB/oct) critically damped filters and phase compensation. Amplitude linearity is 80 Hz - 20 kHz (±2 dB), and cut-off frequencies are 55 Hz - 25 kHz (-6 dB, freestanding). Dispersion is ±80° horizontal and ±10° vertical, coherent in both planes. Maximum continuous SPL is 108 dB (per pair at 1 m). Audio input is a rear panel female XLR (pin 2 +ve) with 1 V/2 V RMS input sensitivity via a switch, a 0 dB to -6 dB trim and 10 kohms input impedance per leg. Each cabinet measures 450 x 250 x 343 mm (H x W x D), plus 48.7 mm for the amplifier pack, and weighs 23.4 kg.

Engineering and use context

In the active version the passive crossover network is replaced by active filters, and the built-in two-way amplifier has frequency, gain and phase correction optimised individually at the ATC manufacturing facility. ATC quotes THD of 0.0006% for the LF amplifier (100 Hz, 1 dB below rated power) and 0.0022% for the HF amplifier (10 kHz). Its HF upper -3 dB point is 430 kHz. S+N/N ratio is 112 dBA for the LF channel (ref. 40 V) and 109 dBA for the HF channel (ref. 20 V).

On the rear panel a rotary switch sets an 80 Hz low frequency shelf from -2 dB to +3 dB in 1 dB steps. Overload protection is active FET momentary gain reduction with a front panel limit LED, backed by an amplifier thermal trip circuit. Mains supply is 115/230 V, 50/60 Hz, selectable internally by a technician, and consumption is 55 VA idle and 375 VA maximum. The loudspeaker is designed for vertical orientation, and a K&M 24120 wall mount can be used once the cabinet is modified to accept a top-hat mount.

Pairing

A source with a balanced line output, such as a mixing console, audio interface or preamplifier, is required. Unbalanced connection through an XLR to RCA cable is also possible.

Alternatives

The SCM25A Pro Mk2 is ATC's three-way active near-field monitor in the same professional range.

Spezifikationen

  • Modellbezeichnung

    SCM20ASL Pro

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten