Hifiverse

Regallautsprecher - DALI ALTECO C-1

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI ALTECO C-1
Bildquelle - (c) DALI

The ALTECO C-1 is a compact two-way passive loudspeaker from DALI of Denmark, presented by the company as a true multipurpose speaker. It adds Dolby Atmos, DTS:X and Auro-3D height information to an existing surround system, and it is also a discreet on-wall solution for a stereo installation. DALI sells it in pairs in black ash, white and walnut finishes, and the pair price is CAD 800.

Key specs that matter

Crossover principle is 2-way, with a 21 mm soft dome tweeter and a 114 mm (4½ in.) wood fibre woofer crossed over at 2.1 kHz. Frequency range is 74 Hz - 26 kHz (±3 dB). Sensitivity is 83 dB (2.83 V/1 m), and nominal impedance is 6 ohms. Maximum SPL is 103 dB at 1 m. DALI recommends amplifier power of 40 - 100 W.

Engineering and use context

Its front is angled. Placed on top of the front or rear speakers, the ALTECO C-1 radiates upward and reproduces the height channels. It can also take the place of traditional front speakers mounted high on a wall or horizontally on a sidewall. A dual sound mode switch has two positions - UP gives soft, downward sound dispersion, and DOWN is intended for close listening, for example when the speaker is used as a rear or surround channel on the wall near the listening position.

DALI's trademark low-loss wood fibre cone is made from a mix of fine-grain paper and wood fibre pulp. According to DALI, this gives a rigid and lightweight membrane, and the uneven structure of its surface minimises surface resonances. Above it sits a very light soft dome tweeter with a woven fabric diaphragm, for which DALI specifies extended frequency response and wide dispersion. Drivers and crossover are DALI designed and custom built.

Pairing

Height use requires an AV receiver or processor that decodes Dolby Atmos, DTS:X or Auro-3D and has height channel outputs. For stereo use, an amplifier within DALI's recommended power range is required.

Alternatives

DALI has no other dedicated height speaker, and the closest on-wall model in its range is the OBERON ON-WALL.

Spezifikationen

  • Modellbezeichnung

    ALTECO C-1

  • Untere Grenzfrequenz +/- 3dB (Hz)

    74

  • Obere Grenzfrequenz +/- 3dB (Hz)

    26000

  • Empfindlichkeit (dB at 1 W/1m)

    83

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    40 - 100

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten