Hifiverse

Regallautsprecher - DALI RUBICON 2

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI RUBICON 2
Bildquelle - (c) DALI

The RUBICON 2 is a two-way stand-mount loudspeaker from the DALI RUBICON series, now listed by DALI among its discontinued models. Its design language builds on the MENTOR MENUET, and it is the smallest model of the RUBICON line. Four finishes were offered - High-Gloss White, High-Gloss Black, Rosso and Walnut veneer.

Key specs that matter

A 29 mm soft dome tweeter and one 165 mm (6.5 in.) low-loss wood fibre low/mid frequency driver are crossed over at 3,100 Hz. Frequency range is 50 Hz - 26 kHz (±3 dB). Sensitivity is 87 dB (2.83 V/1 m), nominal impedance is 4 ohms and maximum SPL is 107 dB at 1 m. DALI recommends amplifier power of 40 - 150 W. The cabinet is solid wood laminate, and the terminals are gold-plated.

Engineering and use context

DALI makes the drivers in-house at its production facilities in central Denmark. The woofer uses the patented SMC technology from the Linear Drive System of the EPICON series, with an SMC magnet pole-piece surrounded by a slitted copper cap to reduce distortion. Its wood fibre cone has a light, rigid and randomly uneven structure for piston-like movement and reduced surface resonance. A soft, low-loss rubber surround and a cast-aluminium chassis were designed specifically for this model, with the chassis shaped for airflow around the cone and magnet system.

According to DALI, the 29 mm tweeter reaches higher than the soft dome of its hybrid tweeter module, and it has a light voice coil driven by a ferrite magnet. Inside the cabinet each driver sits in its own separate chamber and is tuned individually.

Pairing

An amplifier stable into 4 ohms is required.

Alternatives

The DALI MENUET is a smaller two-way bookshelf speaker with a 115 mm (4.5 in.) woofer.

Spezifikationen

  • Modellbezeichnung

    RUBICON 2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    26000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    40 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten