Hifiverse

Regallautsprecher - KRK Systems ROKIT 8 GEN 5

Beschreibung, Bilder, technische Daten und Spezifikationen

KRK Systems ROKIT 8 GEN 5
Bildquelle - (c) KRK Systems

The ROKIT 8 Generation Five is an active two-way studio monitor from KRK Systems, a company founded in 1986 and now a member of the Gibson family of brands. It is the largest of the three fifth-generation ROKIT models, alongside the ROKIT 5 and ROKIT 7 Generation Five. Gibson announced the fifth-generation line in late March 2024.

Key specs that matter

Configuration is a two-way bass reflex system. A 203 mm woofer with a woven Kevlar aramid fibre cone and a ferrite magnet sits below a 25 mm silk dome tweeter with a copper cap and its own ferrite magnet. Crossover frequency is 1.64 kHz. Frequency response is 42 Hz - 36 kHz (±3 dB), and frequency range is 32 Hz - 40 kHz (+3/-10 dB). Amplification is bi-amplified class D, 135 W LF and 68 W HF, 203 W in total (1% THD+N), with 312 W of dynamic power (instantaneous peak, 10% THD+N). Maximum SPL is 111 dB. Coverage angles are 148° horizontal x 125° vertical (-6 dB, averaged from 900 Hz to 9 kHz). Input impedance is 5.12 kohms balanced, and SNR is better than 94 dB on the low sensitivity setting with a balanced input. Each monitor measures 400 x 266 x 319 mm (H x W x D) and weighs 10.45 kg.

Engineering and use context

Onboard DSP provides three voicing modes. Mix Mode has flat frequency and phase response, Focus Mode is a mid-focused voicing for analysis of the midrange band, and Create Mode is intended for writing, producing and casual listening. According to KRK, the woven cone is chosen for damping and modal breakup control, and the tweeter uses a new, highly damped silk dome diaphragm. Its class D amplifiers run at reduced operating temperatures for long work sessions.

The front-ported bass reflex enclosure is PVC vinyl wrapped MDF, with a low diffraction baffle of structurally reinforced high impact polystyrene. Two magnetic faceplates come with it, one with a protective grille and one without, and each is removed by reaching into the port. Foam wedge isolation pads are also in the box. Four M6 points on the bottom accept the optional KRKSTDX68W1 bracket or KRKSTDX4A1 35 mm adapter.

On the rear, an LCD function screen shows level, voicing, EQ and system settings, and one function knob is rotated and pushed to change them. Level moves in 0.1 dB steps from the factory 0 dB (+4 dBu) setting. Automatic standby engages after 30 minutes without signal and can be switched off in the SETUP menu. A universal 100 - 240 V switching mode supply is built in.

Pairing

Sources are an audio interface, mixing console or monitor controller with balanced XLR or TRS outputs. The Neutrik combo input also accepts an unbalanced TS jack.

Alternatives

The ROKIT 7 Generation Five is the 178 mm model of the same generation, with 145 W of bi-amplified class D power.

Spezifikationen

  • Modellbezeichnung

    ROKIT 8 GEN 5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    42

  • Obere Grenzfrequenz +/- 3dB (Hz)

    36 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    203

  • Größe (sm)

    40.0 x 26.6 x 31.9

  • Gewicht (kg)

    10.45

  • Offizieller Link

Weitere Komponenten