Hifiverse

Regallautsprecher - PMC result6

Beschreibung, Bilder, technische Daten und Spezifikationen

PMC result6
Bildquelle - (c) PMC

The result6 is an active two-way nearfield reference monitor from PMC of Biggleswade, England, and the company presents it as the introduction to its studio range and to ATL bass loading. It has no complex DSP-based user options or room profiles. The result6 was also the first PMC product developed with the company's laser-based measurement system.

Key specs that matter

Drive units are a PMC 170 mm bass driver with a doped natural-fibre cone and a 27 mm fabric soft dome tweeter, crossed over at 2 kHz. Twin Class-D amplifiers provide LF 100 W rms and HF 65 W rms. Usable frequency response is 45 Hz - 22 kHz, maximum SPL is 112 dB at 1 m and effective ATL length is 1.5 m. Input is a balanced analogue XLR with input impedance above 8 kOhm, and gain trim covers -10 to +10 dB. Each cabinet measures 380 x 199 x 360 mm (H x W x D) and weighs 8 kg.

Engineering and use context

Its tweeter has ferrofluid cooling, a compact neodymium motor and a perforated acoustic lens that extends the response beyond 20 kHz and controls dispersion through the crossover region. Around it sit the D-Fins, or Diffraction Fins, a finned HF driver surround developed for this model that diffuses reflections from the cabinet edges and widens HF dispersion. PMC designed the analogue crossover with circuit-modelling techniques and gave it 24 dB per octave filters. RFI and EMI input filtering, a dual-band power limiter and non-invasive driver protection sensors complete the signal path, and all active electronics are decoupled from the cabinet by isolation mounts.

Inside the highly braced cabinet the bass driver sits near one end of a damped transmission line with newly formulated damping material, and the lowest frequencies emerge from the front vent in the same polarity as the bass unit. PMC tuned the ATL and bass driver in a two-stage laser measurement process, first on the driver in free space and then on the complete loudspeaker. A white power LED turns red on a fault, and a second red LED shows limiter activity. Rubberised mounting bands decouple the cabinet from its support. Registration within 10 days of purchase gives a 20-year warranty.

Pairing

The XLR input is wired pin 1 screen, pin 2 hot, pin 3 cold. A balanced line output from an audio interface, console or monitor controller with volume control is required. The IEC C14 mains socket with adjacent power switch accepts 90 - 260 V, and the optional BRKT tilting wall bracket attaches to anchor points on the cabinet.

Alternatives

The PMC6 is the DSP-controlled two-way active nearfield in the same studio range, with 200 W per driver and an AES3 digital input.

Spezifikationen

  • Modellbezeichnung

    result6

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    65 + 100

  • Größe (sm)

    38.0 × 19.9 × 36.0

  • Gewicht (kg)

    8

  • Offizieller Link

Weitere Komponenten