Hifiverse

Regallautsprecher - KEF R3 Meta

Beschreibung, Bilder, technische Daten und Spezifikationen

KEF R3 Meta
Bildquelle - (c) KEF

The R3 Meta is the bookshelf model of the KEF R Series, a seven-model range launched on 7 February 2023 with the R11 Meta, R7 Meta and R5 Meta floorstanding speakers, centre and surround models. Finishes are Black Gloss, White Gloss and Walnut, plus an Indigo Gloss Special Edition.

Key specs that matter

Design is three-way bass reflex. The Uni-Q driver array has a 25 mm (1 in.) vented aluminium dome HF unit with MAT and a 125 mm (5 in.) aluminium cone MF unit, and the bass unit is a 165 mm (6.5 in.) hybrid aluminium cone. Crossover frequencies are 420 Hz and 2.3 kHz. Frequency response is 58 Hz - 28 kHz (±3 dB), frequency range is 38 Hz - 50 kHz (-6 dB), and typical in-room bass response reaches 30 Hz (-6 dB). Sensitivity is 87 dB (2.83 V/1 m). Impedance is 4 ohms (min. 3.2 ohms), and recommended amplifier power is 15 - 180 W. Maximum output is 110 dB. Harmonic distortion (90 dB, 1 m) is below 1% from 73 Hz and below 0.5% from 90 Hz to 20 kHz. Dimensions are 422 x 200 x 336 mm (H x W x D, with terminal), and weight is 12.4 kg.

Engineering and use context

Every R Series model uses a bespoke 12th generation Uni-Q driver array with MAT. Metamaterial Absorption Technology is a maze-like structure behind the tweeter in which each channel absorbs a specific frequency, and KEF states that together the channels absorb 99% of the unwanted sound from its rear. A refined tweeter gap damper tames resonances, and a flexible Decoupling Chassis prevents unwanted vibrations. The Uni-Q acts as a single point source.

Its hybrid aluminium bass unit has greater driver excursion. For this generation KEF also revised the crossover design and the signal path. Microfibre grilles with 1801 precision-cut holes for each driver are included, together with rubber feet and port bungs. Threaded inserts in the base allow secure mounting on the S3 Floor Stand, sold separately.

Pairing

An amplifier stable into 4 ohm loads is required. R2 Meta and R6 Meta are the matching centre speakers, with identically sized Uni-Q arrays.

Alternatives

The LS50 Meta is KEF's two-way bookshelf speaker with a 12th generation Uni-Q driver array and MAT.

Spezifikationen

  • Modellbezeichnung

    R3 Meta

  • Untere Grenzfrequenz +/- 3dB (Hz)

    58

  • Obere Grenzfrequenz +/- 3dB (Hz)

    28000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    15 - 180

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    42.2 × 20.0 × 33.6

  • Gewicht (kg)

    12.4

  • Offizieller Link

Weitere Komponenten