The Coda W is an active wireless stereo speaker pair from KEF, sold as a primary and a secondary speaker. KEF introduced it in October 2025 at USD 999.99 per pair, and the name revives the Coda, a KEF model from the 1970s. Five finishes are listed - Vintage Burgundy, Nickel Grey, Moss Green, Midnight Blue and Dark Titanium.
Key specs that matter
Each speaker has a Uni-Q driver array with a 25 mm aluminium dome HF unit and a 130 mm magnesium/aluminium alloy LF/MF cone. Amplifier output per speaker is 70 W for LF and 30 W for HF, both Class D. Frequency range is 38 Hz - 20 kHz (-6 dB) and frequency response is 41 Hz - 20 kHz (±3 dB), both measured at 85 dB/1 m and dependent on EQ settings. Maximum SPL is 102 dB at 1 m. Bluetooth is version 5.4 with aptX Adaptive and aptX Lossless. Source resolution is up to 96 kHz/24 bit over optical, up to 192 kHz/24 bit over USB Type C and up to 1.411 Mbps PCM over HDMI. Dimensions are 285 x 168 x 268 mm (H x W x D) per speaker, and weight is 11.3 kg per set. Power input is 100 - 240 V AC, 50/60 Hz, with 200 W operating and below 0.5 W standby consumption.
Engineering and use context
This Uni-Q is the 12th generation of KEF's driver array. On the primary speaker are HDMI, optical, USB Type C, RCA line and RCA phono (MM type) inputs plus Bluetooth. Outputs on the same speaker are an RCA subwoofer output, a USB Type C interspeaker port and a USB Type C 5 V DC port. Its secondary partner has a single USB Type C interspeaker input. The link between the speakers is wired, and all sources are resampled to 96 kHz/24 bit PCM for it.
A built-in phono preamp is part of the primary speaker, and the RCA line input is also intended for turntables with their own phono preamp. HDMI works in ARC mode for a television. Signal processing runs on the Music Integrity Engine, KEF's own set of DSP algorithms. In the box are the pair of speakers, a remote control, a power cable, a 3 m interspeaker cable and a quick start guide. KEF also offers the SQ1 Floor Stand and a C-Link Interspeaker Cable as accessories. Both speakers need a mains connection and the interspeaker cable, so only the source connection is wireless.
Pairing
A turntable with an MM cartridge connects to the RCA phono input. An external KEF subwoofer connects to the RCA subwoofer output. A television connects over HDMI ARC.
Alternatives
The KEF LSX II is a smaller active wireless pair, with a 115 mm Uni-Q cone, a 19 mm aluminium dome HF unit and network streaming.