Hifiverse

Regallautsprecher - Joseph Audio PULSAR2 Graphene

Beschreibung, Bilder, technische Daten und Spezifikationen

Joseph Audio PULSAR2 Graphene
Bildquelle - (c) Joseph Audio

The Pulsar2 Graphene is the second generation of the Pulsar, the compact two-way stand-mount loudspeaker from Joseph Audio of Melville, New York. Joseph Audio announced it in April 2019, about ten years after the original Pulsar appeared. The first Pulsar was priced at USD 7,000 per pair in 2012, and the Pulsar2 Graphene lists at about USD 8,995 per pair. In the current range it sits above the Prism.

Key specs that matter

The driver complement is the tweeter of the Pearl3 floorstanding loudspeaker and a long-throw woofer with a precision cast magnesium cone coated with graphene, both supplied by SEAS of Norway. Both are crossed over at 2 kHz in a parallel two-way network. Frequency response is 42 Hz - 20 kHz (±2 dB, listening window). Impedance is 8 ohms nominal, 6 ohms minimum. Each enclosure measures 381 x 229 x 330 mm (H x W x D), and the shipping weight is about 16.3 kg per speaker. Two sets of Cardas patented binding posts are mounted on the rear panel. The standard finish is gloss black on the front and top with engineered rosewood sides, and the maker has also shown a Sapele Pommele version.

Engineering and use context

Its woofer is the main change from the first Pulsar. The cast magnesium cone is retained, while Joseph Audio used Finite Element Analysis to rework the motor system and the suspension. SEAS applies a graphene-based nanomaterial to its magnesium alloy cones, and the new coating led to redesigned filters in the crossover. The network follows the Asymmetrical Infinite Slope principle with steep filter slopes, and every unit is calibrated to match the design prototype. According to the maker, the driver outputs stay in phase across the crossover band. The enclosure is bass reflex loaded.

On the first-generation Pulsar the enclosure was MDF with side walls just under 38 mm thick and a bevelled front baffle. That model also used Cardas internal wiring and heavy-gauge crossover inductors, and it carried a power handling rating of 25 - 300 W.

Pairing

Joseph Audio states that a true 8 ohm load is less critical of amplifiers and cables, tube amplifiers included. The dual terminals allow bi-wiring or bi-amping with separate channels for woofer and tweeter.

Alternatives

The Joseph Audio Prism is the lower-priced two-way stand-mount of the brand, with an aluminium cone woofer crossed over at 2.5 kHz.

Spezifikationen

  • Modellbezeichnung

    PULSAR2 Graphene

  • Untere Grenzfrequenz +/- 3dB (Hz)

    42

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    38.1 x 22.9 x 33.0

  • Gewicht (kg)

    16.3

  • Offizieller Link

Weitere Komponenten