The Prism is a compact two-way stand-mount loudspeaker from Joseph Audio Inc., the company of designer Jeff Joseph in Melville, New York. It sits below the Pulsar2 Graphene in the range and was introduced for buyers who wanted a Joseph Audio speaker below the price of the Pulsar. Jeff Joseph first showed it at CES in January 2014 next to the Profile tower, at USD 3,699 per pair, and it appeared at CES again in 2016. Its stated target was about 80% of the Pulsar performance at half its price. Its name refers to the profiled, non-parallel enclosure walls.
Key specs that matter
This is a two-way bass reflex design with a 25 mm dual-section Sonatex fabric dome tweeter from SEAS of Norway and a 140 mm aluminium cone woofer. The crossover point is 2.5 kHz. Frequency response is 47 Hz - 20 kHz (±2 dB, listening window). Impedance is 8 ohms nominal, 7 ohms minimum. Recommended amplifier power is 15 - 250 W. Each cabinet measures 356 x 178 x 305 mm (H x W x D), with a shipping weight of about 10 kg per speaker. Connection is by a single pair of Cardas five-way binding posts with rhodium and silver plating. Finish options are satin white, black and a dark red, and the grille is held by hidden magnets.
Engineering and use context
Joseph Audio uses its Asymmetrical Infinite Slope crossover. The woofer low-pass slope reaches about 100 dB per octave, while the tweeter has a third-order 18 dB per octave high-pass filter. Each network is adjusted individually in production, and according to the maker both drivers stay in phase through the crossover region. The woofer was designed for this model, with a long throw and a powerful motor, and the reflex port is on the rear panel.
In the enclosure the front baffle is wider than the back, and each side panel is formed of four planes instead of one flat surface. The Prism woofer has an aluminium cone, where the Pulsar uses a cast magnesium cone. Joseph Audio publishes no sensitivity figure for the Prism.
Pairing
The maker states that a true 8 ohm load is less critical of amplifier and cable choice, tube amplifiers included. A single terminal pair does not allow bi-wiring or bi-amping.
Alternatives
The Joseph Audio Pulsar2 Graphene is the other two-way stand-mount of the brand, with a graphene-coated cast magnesium cone woofer and dual Cardas terminals.