The OPTICON 2 MK2 is a mid-sized stand-mount speaker from DALI of Denmark for compact to medium-sized listening spaces. It builds on the MK1 series and is fully assembled at DALI's production facilities in Denmark, from components produced in-house or sourced from specialist manufacturers. Stereo pairs are built and tested by one technician using components from the same batch, for visual and acoustic matching. Tobacco Oak is one of the finishes.
Key specs that matter
This is a 2-way bass reflex design with one 6½-inch bass/midrange driver and a 29 mm soft dome tweeter, crossed over at 2,000 Hz. Frequency range is 59 Hz - 25 kHz (±3 dB). Sensitivity is 86.5 dB (2.83 V/1 m) and nominal impedance is 4 ohms. Maximum SPL is 107 dB at 1 m, with a recommended amplifier power of 30 - 150 W.
Engineering and use context
DALI designed the bass/midrange driver for low loss and low distortion. Its paper pulp and wood fibre cone is specified for minimal break-up resonance. The magnet system consists of a large ferrite ring magnet surrounding a pole-piece made entirely of DALI's patented SMC (Soft Magnetic Composite). DALI states that SMC reduces the mechanical distortion caused by hysteresis and eddy currents, with lower third-order distortion as the result.
Derived from the CALLISTO C series, the lightweight 29 mm soft dome tweeter replaces the 28 mm unit of the OPTICON MK1. According to DALI, the slightly larger diameter gives lower distortion, higher power handling and an extended low-frequency response for the tweeter. The same tweeter is used throughout the OPTICON MK2 series for consistent dispersion characteristics in a multichannel system.
Reflex loading extends low-frequency bandwidth and increases power handling. The reflex port uses a dual-flare shape that minimises turbulence at the entry and exit flares. A 25 mm thick front baffle and extra internal bracing keep panel resonance low. In central Denmark DALI carries out every step from cutting and routing the wood laminate panels to installing the drivers and crossover.
Pairing
An amplifier stable into 4 ohms is required. For a surround system the matching wall-mounted left, centre or right speaker is the OPTICON LCR MK2.
Alternatives
The OPTICON 1 MK2 is the compact stand-mount model of the same series.