The OBERON ON-WALL is a passive two-way on-wall loudspeaker from DALI's OBERON series, which the Danish company now lists among its discontinued products. It was designed for stereo pairs and for surround channels in a home cinema. Its slim cabinet has rounded edges and a fabric grille, and the vinyl finishes were light oak, dark walnut, white and black ash.
Key specs that matter
Frequency range is 55 Hz - 26 kHz (±3 dB). Sensitivity is 87 dB (2.83 V/1 m), nominal impedance is 6 ohms and maximum SPL is 107 dB at 1 m. A 2-way crossover at 2.1 kHz divides the band between one 133 mm woofer and one 29 mm soft dome tweeter. Recommended amplifier power is 25 - 100 W. Its bass reflex enclosure is tuned to 50 Hz. Each speaker measures 385 x 245 x 120 mm (H x W x D) and weighs 4.9 kg. There is a single input, and rubber feet and a manual are included.
Engineering and use context
DALI uses a down-firing bass port system here that was originally introduced in the RUBICON LCR. With the ports opening downwards, the ports and the wall behind the cabinet work together to extend bass reproduction.
The woofer has a low loss design with a new wood fibre structured cone, made from fine-grain paper pulp reinforced with wood fibres, plus a low loss surround and spider suspension. Inside its magnet system, the iron pole-piece includes a patented SMC (Soft Magnetic Composite) disc. According to DALI, SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents and lowers third-order distortion.
An oversized 29 mm ultra-lightweight soft dome tweeter was developed specifically for the OBERON series. DALI states that the large membrane generates higher sound pressure with less excursion. Near the dome, the tweeter front plate has a geometry similar to the OPTICON and RUBICON tweeters. Driver materials and geometry together give a wide dispersion pattern.
High density, CNC machined MDF board dressed in vinyl forms the cabinet. Solid bracings run across the inside, and acoustic damping material lines the sides, top and bottom internally.
Pairing
An amplifier or AV receiver rated for 6 ohm loads within DALI's recommended power range is required. The single input does not allow bi-wiring. For a surround system the matching models are the other OBERON speakers, including the OBERON VOKAL centre.
Alternatives
The OPTICON LCR MK2 is a larger DALI on-wall speaker with a 165 mm woofer and a rotatable hybrid tweeter module.