Hifiverse

Regallautsprecher - DALI OBERON 3

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI OBERON 3
Bildquelle - (c) DALI

Of the two OBERON stand-mounts that DALI put on sale in 2018, the OBERON 3 has the bigger cabinet. Its series also included the OBERON 1, the floorstanding OBERON 5, 7 and 9, an on-wall model and two VOKAL speakers. DALI designed it as a compact stand-mount cabinet with the scale of a floorstanding speaker, also for shelf mounting, and now lists it among discontinued products. It is a two-way bass reflex design.

Key specs that matter

Driver complement is one 178 mm low/mid frequency driver and one 29 mm soft dome tweeter, with the crossover at 2.4 kHz. Frequency range is 47 Hz - 26 kHz (±3 dB). Sensitivity is 87 dB (2.83 V/1 m), and nominal impedance is 6 ohms. Maximum SPL is 108 dB at 1 m, and recommended amplifier power is 25 - 150 W. Each cabinet measures 350 x 200 x 315 mm (H x W x D) and weighs 6.48 kg. Four vinyl finishes were offered - black ash, white, dark walnut and light oak.

Engineering and use context

Its woofer is the same 178 mm low loss unit used in the OBERON 7, with a wood fibre structured cone for the midrange and bass. That cone is a blend of fine-grain paper pulp reinforced with wood fibres, a stiff and lightweight structure, and it works with a low loss surround and spider suspension. In the woofer magnet, the iron pole-piece includes a patented SMC (Soft Magnetic Composite) disc. DALI states that SMC reduces mechanical distortion caused by hysteresis and eddy currents and lowers third-order distortion in the motor system.

DALI developed the oversized 29 mm ultra-lightweight soft dome tweeter specifically for the OBERON series. With its larger membrane, the tweeter generates higher sound pressure with less excursion. Around the dome, the front plate has a geometry similar to the OPTICON and RUBICON tweeters. Driver materials, driver geometry and the crossover are designed for a wide dispersion pattern.

Its cabinet is a high density, CNC machined MDF board dressed in high-grade vinyl, and solid bracings across the inside reduce cabinet resonance. Both bass ports are on the rear panel. A rounded front grille, new with the OBERON series, is removable, and rubber feet come in the box.

Pairing

A stereo amplifier or AV receiver rated for 6 ohm loads within the recommended power range is required. The single pair of terminals does not allow bi-wiring or bi-amping.

Alternatives

The DALI OBERON 1 is the smaller stand-mount of the series, with a compact cabinet for smaller rooms, discreet setups or wall mounting.

Spezifikationen

  • Modellbezeichnung

    OBERON 3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    47

  • Obere Grenzfrequenz +/- 3dB (Hz)

    26000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    25 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten