The F5E is the bookshelf model of the F500E Series from Fyne Audio, a range that also includes the F55E and F501E plus the F5E LCR and F502E LCR centre models. Fyne unveiled the series at the Warsaw Audio Video Show in 2024 and calls the F5E the entry point to its technology. It can be wall mounted, used on a stand or placed on a bookshelf. The UK price is GBP 399.98 per pair including VAT.
Key specs that matter
System type is two-way, with a port that vents downwards onto a BassTrax Tractrix diffuser. Drive unit complement is one 125 mm IsoFlare unit with a multi-fibre bass/mid cone, a FyneFlute surround and a 19 mm titanium dome compression tweeter. Crossover frequency is 1.8 kHz, with a 2nd order low pass and a 1st order high pass. Sensitivity is 87 dB (2.83 V/1 m) and nominal impedance is 8 ohms. Frequency response is 55 Hz - 38 kHz (-6 dB, typical in room). Recommended amplifier power is 30 - 90 W RMS, and continuous power handling is 45 W RMS. Dimensions are 270 x 174 x 228 mm (H x W x D, grille and terminals included, feet excluded), and net weight is 3.9 kg. Finishes are Black Ash and Walnut vinyl wrap.
Engineering and use context
In the IsoFlare point source driver the bass/mid cone and the compression tweeter share a common centre. For the F500E generation Fyne gave the unit a computer optimised HF waveguide, a neodymium magnet and a titanium diaphragm whose break-up modes lie beyond 30 kHz. A vented rear chamber lowers the resonance of the HF unit. Below the cabinet, BassTrax converts the output of the downward port into a 360-degree wavefront.
Low-loss laminated core inductors and polypropylene film capacitors are used in the crossover, which was computer optimised and then tuned by listening. Its cabinet is high-rigidity MDF with internal bracing. Wall brackets are integral to the rear panel, the fixings are hidden and the grilles attach magnetically. A single set of terminals accepts bare wire, 4 mm plugs or spade connectors. Accessories include eight self-adhesive feet, four wall brackets with eight fixing screws, eight rubber wall supports and a mounting template. Fyne specifies a running-in period of about 40 hours.
Pairing
An amplifier rated for an 8 ohm load within the recommended power range is required. Spade connectors or bare wire are required when the speaker is wall mounted. The F5E LCR is the matching centre channel for a home cinema system.
Alternatives
The Fyne Audio F300i is a two-way rear-ported bookshelf speaker with a 125 mm multi-fibre bass/mid unit and a separate 25 mm titanium dome tweeter.