Fyne Audio's Vintage Classic VIII SM is a stand-mount loudspeaker from the Vintage Classic series, with design cues taken from 1970s bookshelf speakers. It is built in the UK. Each cabinet is hand-finished in walnut veneer with a deep black baffle and gold trim. Price at Fyne Audio is GBP 3,499.99 per pair including VAT.
Key specs that matter
This is a 2-way design with a downward-facing port and a BassTrax Tractrix diffuser. The drive unit complement is one 200 mm IsoFlare point source driver with a multi-fibre bass/midrange cone, a FyneFlute surround and a 25 mm magnesium dome compression tweeter, on a ferrite magnet system. Crossover frequency is 1.8 kHz. Sensitivity is 91 dB (2.83 V/1 m), and nominal impedance is 8 ohms. Frequency response is 34 Hz - 34 kHz (-6 dB, typical in room). Recommended amplifier power is 30 - 180 W RMS, continuous power handling is 90 W RMS and peak power handling is 360 W. Dimensions are 540 x 330 x 294 mm (H x W x D, with grille and terminals), and net weight is 16.1 kg each.
Engineering and use context
The crossover is a bi-wired passive low-loss network with a 2nd order low pass and a 1st order high pass, and Fyne Audio applies its Cryo-Lite treatment to it. Two level adjustments of ±3 dB are provided, one for the 1.8 kHz - 34 kHz band (High frequency energy) and one for the 2.5 kHz - 5.0 kHz band.
Fyne Audio states that the BassTrax porting is designed for the 360 degree LF wavefront with the speaker mounted above floor level on stands. The cabinet is high-density fibreboard, veneered in walnut, with extensive internal bracing.
Pairing
Tube and solid-state amplifiers within the recommended power range can drive it. The bi-wired crossover allows separate cable runs to the bass/midrange and tweeter sections. Its matching stand is the Fyne Audio FS5.
Alternatives
The Fyne Audio Vintage Classic VIII is the floorstanding version of this model in the same series.