Hifiverse

Regallautsprecher - Dynaudio Emit 20

Beschreibung, Bilder, technische Daten und Spezifikationen

Dynaudio Emit 20
Bildquelle - (c) Dynaudio

The Emit 20 is a two-way bookshelf loudspeaker from Dynaudio, the Danish loudspeaker manufacturer, and part of the Emit series, which Dynaudio calls the entry point of its range. Dynaudio derives it from the Evoke, Contour i and Confidence series, and its tweeter is the Cerotar taken directly from Evoke. The crossover is custom-designed by the same Dynaudio team that developed the Core range. Finishes are Black, White and Walnut laminate.

Key specs that matter

Design is two-way bass reflex with a rear double flared port. A 28 mm Cerotar soft dome tweeter with Hexis is combined with an 18 cm MSP mid/bass unit. Crossover frequency is 3800 Hz, 1st order for the tweeter and 2nd order for the woofer. Frequency response is 53 Hz - 25 kHz (±3 dB) and 42 Hz - 35 kHz (-6 dB). Sensitivity is 86 dB (2.83 V/1 m) and rated impedance is 6 ohms. IEC long-term power handling is 160 W. Dimensions are 205 x 370 x 312 mm (W x H x D) without feet and grille, and 325 mm deep with them. Weight is 10.3 kg.

Engineering and use context

On the Cerotar tweeter, a coated fabric dome is combined with the Hexis inner-dome device, which reduces resonance. It is powered by a Ferrite+ strontium carbonate ceramic magnet system.

The woofer diaphragm is a one-piece cone of MSP (Magnesium Silicate Polymer). Based on the Evoke series woofer, it has an aluminium voice coil of copper-coated wire wound onto a two-layer glass-fibre former, and the drive unit uses a stacked ferrite magnet system and a new surround.

Black magnetic grilles come as standard in the box.

Pairing

A stereo amplifier rated for a 6 ohm load is required. Amplifier output should stay within the IEC long-term power handling rating.

Alternatives

The Confidence 20 is a higher two-way bookshelf model in the Dynaudio range, with a 28 mm Esotar 3 tweeter and a down-firing port.

Spezifikationen

  • Modellbezeichnung

    Emit 20

  • Untere Grenzfrequenz +/- 3dB (Hz)

    53

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    160

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    20.5 × 37.0 × 31.5

  • Gewicht (kg)

    10.3

  • Offizieller Link

Weitere Komponenten