The Confidence 20 is a two-way bookshelf loudspeaker in the Confidence range of Dynaudio, the Danish loudspeaker manufacturer. It is the stand-mounted model of the range, and Dynaudio puts the technology of the larger Confidence models on a stand. Finishes are Midnight High Gloss, Blonde Wood, Ruby Wood High Gloss and Smoke High Gloss, with a black grille.
Key specs that matter
Design is two-way bass reflex with a down-firing port. A 28 mm Esotar 3 tweeter is combined with an 18 cm MSP mid/bass unit, crossed over at 2325 Hz with a 2nd-order crossover. Frequency response is 42 Hz - 22 kHz (±3 dB). Sensitivity is 87 dB (2.83 V/1 m). Rated impedance is 6 ohms, with a minimum of 5 ohms at 155 Hz. IEC long-term power handling is 250 W. The cabinet measures 233 x 520 x 414 mm (W x H x D) without feet, grille and stand, and 368 x 1140 x 457 mm with them. Weight is 27 kg.
Engineering and use context
Inside the Esotar 3 tweeter, the Hexis inner dome replaces the felt ring of the Esotar 2 and controls resonances. Its rear chamber is much larger than before to reduce resonance, and the tweeter has a neodymium magnet system with optimised venting.
Dynaudio calls the mid/bass unit an 18 cm NeoTec MSP woofer. Its diaphragm is made of MSP (Magnesium Silicate Polymer), and its motor uses a neodymium magnet with a venting system machined directly into the magnet. The voice coil is aluminium on a glass-fibre former for stiffness.
Both drive units are mounted on a Compex front baffle, a composite that Dynaudio describes as light, rigid and well damped, with mechano-acoustical properties that do not change over time. It is a DDC 2 design, part of Dynaudio Directivity Control, the technology platform of the brand. Each Confidence speaker sits on a solid steel base-plate, and on the Confidence 20 this base-plate is the top-plate of the stand.
Pairing
An amplifier stable into 5 ohms is required. Amplifier output should stay within the IEC long-term power handling rating. The stand is part of the Confidence 20 design.
Alternatives
The Emit 20 is a smaller two-way bookshelf model in the Dynaudio range, with an 18 cm MSP woofer and a 28 mm Cerotar tweeter.