Hifiverse

Regallautsprecher - B&W (Bowers & Wilkins) 805 D4

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) 805 D4
Bildquelle - (c) B&W (Bowers & Wilkins)

The 805 D4 is a two-way stand-mount loudspeaker and the most compact model of the 800 Series Diamond range from Bowers & Wilkins. It is the only model of the range without a dedicated midrange cone, yet it keeps the Diamond dome tweeter and the Solid Body Tweeter-on-Top of the larger models. Its line, the 800 Series, first appeared in 1979 and is developed at the company's research facility in Worthing. In the US it lists at USD 10,000 per pair, stands not included.

Key specs that matter

Description is a 2-way vented-box system. Drive units are one 25 mm (1 in) diamond dome high-frequency unit and one 165 mm (6.5 in) Continuum cone bass/midrange. Frequency range is 34 Hz - 35 kHz, and frequency response is 42 Hz - 28 kHz (±3 dB from reference axis). Sensitivity is 88 dB (on axis, 2.83 Vrms/1 m). Harmonic distortion (2nd and 3rd harmonics, 90 dB, 1 m on axis) is below 1% from 90 Hz to 20 kHz and below 0.3% from 120 Hz to 20 kHz. Nominal impedance is 8 ohms (min. 4.6 ohms). Recommended amplifier power is 50 - 120 W into 8 ohms on unclipped programme, and maximum recommended cable impedance is 0.1 ohm. Dimensions are 440 x 240 x 373 mm (H x W x D), and net weight is 15.55 kg.

Engineering and use context

Bowers & Wilkins quotes the diamond dome as a combination of low mass and high stiffness. Its Solid Body Tweeter-on-Top housing has an elongated form with a longer tube-loading system, and it is decoupled and milled from a single solid block of aluminium. Below it, the Continuum cone uses a composite construction that avoids the abrupt transitions in behaviour of a conventional drive unit.

In the Reverse-Wrap cabinet, front and sides form one continuous curve held together by a spine of solid aluminium. This orientation gives the crossover components their own dedicated space within the cabinet, and the speaker terminals were upgraded for the D4. Matrix bracing of interlocking panels combines solid plywood with aluminium bracing at key stress points. An aluminium top plate carries Leather by Connolly, black for dark cabinets and light grey for lighter ones. Technical features also include the Anti-Resonance plug and the Flowport.

Two pairs of terminals allow bi-wiring, with link wires supplied for single wiring. Carton contents include grilles, two-part foam plugs, self-adhesive pads and a cleaning cloth. Cabinet finishes are Gloss Black, White, Satin Rosenut and Satin Walnut.

Pairing

An amplifier stable into loads below 5 ohms is required. Speaker cable has to stay within the maximum recommended impedance. The matching floor stand is the FS-805 D4, supplied with spikes and rubber feet.

Alternatives

The 805 D4 Signature is the same two-way stand-mount in Signature finishes with an upgraded rear-mounted crossover on aluminium spines.

Spezifikationen