The 705 S3 is a two-way stand-mount loudspeaker in the third generation of the Bowers & Wilkins 700 Series, on sale from 21 September 2022. US launch price was USD 3,400 per pair, and the current US list price is USD 3,800 per pair.
Key specs that matter
It is a 2-way vented-box system. Drive units are a 25 mm Decoupled Carbon Dome high-frequency unit and a 165 mm Continuum cone bass/midrange. Frequency range is 45 Hz - 33 kHz, and frequency response is 50 Hz - 28 kHz (±3 dB from reference axis). Sensitivity is 88 dB (on axis, 2.83 Vrms, 1 m). Harmonic distortion (2nd and 3rd harmonics, 90 dB, 1 m on axis) is below 1% from 100 Hz to 22 kHz and below 0.5% from 150 Hz to 20 kHz. Nominal impedance is 8 ohms (min. 3.7 ohms). Recommended amplifier power is 30 - 120 W into 8 ohms on unclipped programme, with a maximum recommended cable impedance of 0.1 ohm. Height is 345 mm for the cabinet and 413 mm including the tweeter, width is 192 mm, and depth is 297 mm, or 337 mm including grille and terminals. Net weight is 9.58 kg.
Engineering and use context
Its Solid Body Tweeter-on-Top housing is evolved from the latest generation of the 800 Series Diamond. The housing is more elongated than before, incorporates a longer tube-loading system and is milled from a single solid block of aluminium. Bowers & Wilkins describes the whole tweeter assembly as a decoupled component, mechanically isolated from the main cabinet.
Carbon Dome tweeters are purpose-built for the 700 Series. According to Bowers & Wilkins, they raise the breakup threshold to 47 kHz, compared with the earlier aluminium double dome tweeter. Below them, a subtly curved baffle carries a new pod housing for the Continuum cone bass/midrange driver. The Continuum cone has a composite construction that avoids the abrupt transitions in behaviour of a conventional drive unit. Port loading uses a Flowport.
On the back are two linked pairs of terminals. They accept 4 mm banana plugs, 6 and 8 mm spades or bare wire up to 4 mm in diameter. Cabinet finishes are Gloss Black, Satin White and Mocha, plus Rosenut in APAC markets only, with a black grille or a grey one for Satin White.
Pairing
An amplifier rated within the recommended power window is required. With the links removed, the terminals allow bi-wiring or bi-amplification. The matching stand is the FS-700 S3, which is not included.
Alternatives
The Bowers & Wilkins 707 S3 is the smaller 700 Series S3 stand-mount, a 2-way vented-box design with a 130 mm Continuum bass/midrange.