The 3020c is the mid-size bookshelf speaker of the Q Acoustics 3000c series, which builds on the earlier 3000i range. Its line-up comprises the 3010c, 3020c and 3030c bookshelf models, the 3040c and 3050c floorstanding speakers and the 3090c centre channel. Four finishes are offered - Satin Black, Satin White, Claro Walnut and Pin Oak.
Key specs that matter
This two-way design has one 120 mm (4.75 in) bass unit and one 22 mm (0.9 in) treble unit, with a crossover frequency of 2.6 kHz. Frequency response is 60 Hz - 30 kHz (-6 dB). Nominal impedance is 6 ohms (min. 3.7 ohms). Sensitivity is 87 dB (1 m, 2.83 Vrms at 1 kHz), and recommended amplifier power is 25 - 90 W. Effective volume is 6.9 litres. Dimensions are 279 x 175 x 281 mm (H x W x D), and weight is 5.5 kg.
Engineering and use context
Its mid/bass driver uses the C3 (pronounced C-cubed) Continuous Curved Cone, a profile first introduced in the Q Acoustics 5000 series and the M40 powered micro-tower. According to Q Acoustics, the single continuous curve combines the bass performance of a traditional straight conic cone with the midrange control of a flared cone. This cone geometry requires a strong motor, so substantial magnets are coupled to the voice coils. Q Acoustics adds that the large magnets keep the pole plate and yoke near saturation to reduce flux modulation and harmonic distortion.
Following the tweeter design principle of the Concept series, the high frequency driver is hermetically sealed and mechanically isolated (floating) from the baffle. This isolation is intended to prevent internal pressure modulations from within the cabinet and from the adjacent mid/bass driver. Its inner chamber is vented for lower distortion, and the crossover point is set lower than before.
Inside the cabinet, P2P (Point to Point) bracing supports the parts of the enclosure that need to be stiffened. Externally the 3000c is visually minimal, with no discernible joints or bolts and a one-piece driver trim in satin nickel, or satin chrome on the white version. Each pair comes with two foam bungs, two speaker grilles and an owner's manual.
Pairing
An amplifier within the recommended power range and stable into the minimum impedance is required. Q Acoustics recommends its FS50 floor stands for this model. In a home cinema set-up the matching centre speaker is the 3090c.
Alternatives
The Q Acoustics 3030c is the larger bookshelf model of the same 3000c series.