The Momentum 4 Wireless 80th Anniversary Special Edition is a limited colourway of the Sennheiser Momentum 4 Wireless, an around-the-ear Bluetooth headphone with adaptive noise cancellation. Its artwork is by Bond Truluv, a German graffiti artist and a pioneer of augmented reality street art, and the edition marks 80 years of Sennheiser since 1945. It went on sale in summer 2025 in limited quantities at GBP 269 and EUR 369.90, with an Australian list price of AUD 639.95.
Key specs that matter
Each earcup carries a 42 mm dynamic transducer. Frequency range is 6 Hz - 22 kHz, and Sennheiser quotes 106 dB SPL (1 kHz, 0 dBFS) with THD below 0.3% (1 kHz, 100 dB SPL). Impedance is 470 ohms active and 60 ohms passive. Connectivity is Bluetooth 5.2, class 1, 10 mW max, in the 2,402 - 2,480 MHz band, with the A2DP, AVRCP and HFP profiles. Supported codecs are SBC, AAC, aptX and aptX Adaptive. A built-in 700 mAh lithium-ion battery gives up to 60 hours of music via Bluetooth with ANC on.
Engineering and use context
According to Sennheiser, the anniversary edition keeps the same feature set as the standard model. On the left earcup, the artist's signature throwie tag is layered over a raw backdrop. Abstract linework inspired by audio waveforms covers the right side, and yellow accents with a yellow 80 refer to the HD 414.
Noise cancellation is hybrid adaptive ANC, and a hear-through mode passes outside sound to the ears with the headphones on. Two MEMS microphones per side form a beamforming array for noise reduction and voice pick-up, with a 50 Hz - 10 kHz response and automatic wind noise suppression. Smart Pause stops playback when the headphones are taken off, and Auto On/Off powers them up or down. In the Smart Control app there are a built-in EQ, presets, sound modes and a Sound Personalization feature.
A full charge takes approximately 2 hours through the USB-C socket at 5 V and 800 mA max, and 5 minutes of charging gives up to 4 hours of playtime. Comfort comes from a padded headband, deep cushioned earpads and a low-friction hinge mechanism. Supplied with the headphone are a carry case, a USB-C charging cable, an audio cable with 3.5 mm and 2.5 mm jacks and an airplane adapter.
Pairing
A Bluetooth source with aptX Adaptive, AAC or SBC is required for wireless use. The supplied audio cable allows wired passive use at 60 ohms. No separate headphone amplifier is required.
Alternatives
The Sennheiser Accentum Plus Wireless is a lower-priced around-the-ear Bluetooth headphone from the same range.