Hifiverse

Kopfhörer - Sennheiser HD 600

Beschreibung, Bilder, technische Daten und Spezifikationen

Sennheiser HD 600
Bildquelle - (c) Sennheiser

The HD 600 is an open-back, circumaural dynamic headphone from Sennheiser. It was introduced in 1997, and Sennheiser still lists it more than 20 years after its release as a reference headphone for analysing and listening to a hi-fi system. Current production is assembled in Ireland, and in the EU it comes with a minimum two-year legal guarantee.

Key specs that matter

Transducer principle is dynamic, open, and ear coupling is circumaural. Each earcup has a 42 mm driver with a 38 mm diaphragm. Frequency response is 12 Hz - 40.5 kHz. Sound pressure level is 97 dB (1 V), and nominal impedance is 300 ohms. THD is below 0.1% (1 kHz, 1 V). Magnetic field strength is quoted as 1.8 mT. Weight is 260 g. The detachable cable is 3 m long and ends in a 6.3 mm stereo jack plug, with an adapter to 3.5 mm included in the box.

Engineering and use context

Ultralight aluminium voice coils drive the 38 mm diaphragm. A specialised acoustic silk controls the airflow in the driver, and Sennheiser notes that this material requires hand assembly. Its earcup is acoustically transparent and open at the back. The grille pattern was designed for this transducer system, and the resonators use stainless steel mesh so that every unit performs the same after manufacturing.

Each transducer is measured against fixed standards across the frequency range in both channels, and production tolerances are tight to reduce the variance between the left and right sides. According to Sennheiser, most parts of the HD 600 are modular and can be replaced. Velour padding is used on the earpads. The cable is impedance-matched and has ultra-low capacitance.

Pairing

A headphone amplifier with a 6.3 mm output and enough voltage for high-impedance headphones is required. The supplied adapter allows connection to 3.5 mm outputs of players and A/V receivers.

Alternatives

The HD 650 is Sennheiser's related open-back dynamic headphone of the same family.

Spezifikationen

  • Modellbezeichnung

    HD 600

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Open

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    12

  • Obere Grenzfrequenz +/- 10dB (Hz)

    40 500

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    6.3mm

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    97 (dB/V)

  • Impedanz (Ohm (1 kHz))

    300

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link