Hifiverse

Kopfhörer - Audio-Technica ATH-S220BT

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica ATH-S220BT
Bildquelle - (c) Audio-Technica

The ATH-S220BT is a wireless on-ear headphone in the S series of Audio-Technica, the Japanese audio company founded in 1962. It was released in June 2021, and its built-in battery is rated for up to about 60 hours. A supplied cord allows wired use for listening and calls. Colour options vary by market and include black, white and navy.

Key specs that matter

Type is closed-back dynamic with 40 mm drivers. Frequency response is 5 - 32,000 Hz, sensitivity is 105 dB/mW and impedance is 32 ohms. The headphone microphone is an omnidirectional electret condenser type with a response of 50 - 4,000 Hz and a sensitivity of -42 dB (1 V/Pa, at 1 kHz). Bluetooth is version 5.0 with a range of up to 10 m in line of sight, profiles A2DP, AVRCP, HFP and HSP, the SBC codec, SCMS-T content protection and a transmission band of 20 - 20,000 Hz. Power comes from a built-in 3.7 V lithium-polymer battery with a charging time of about 4 hours. Weight is approx. 180 g, and the operating temperature range is 5 - 40 °C.

Engineering and use context

Audio-Technica specifies thin earpads with a high seal to limit sound leakage. A 10-minute charge gives approximately 3.5 hours of use, and a 30 cm USB Type-A to USB Type-C cable is included for charging. Up to two devices, such as a smartphone and a PC or tablet, can stay connected at the same time over multipoint, and multipairing stores several devices. The low latency mode reduces the delay between sound and picture for video and games on smartphones and tablets.

Android devices that support Google Fast Pair connect with one touch. Buttons on the earcup control play, pause, track skip and volume, and give access to Siri or Google Assistant. A voice guide announces power on and off, pairing status and three battery levels. For wired use there is a 1.2 m cord with an in-line microphone and remote and a gold-plated 4-pole 3.5 mm L-shaped plug, and its microphone covers 100 - 10,000 Hz. Replacement earpads are available as the HP-S220BT.

Pairing

Any Bluetooth source with SBC is compatible. A 3.5 mm headphone socket is required for wired use with the supplied cord.

Alternatives

The ATH-S300BT is the S-series model from Audio-Technica with hybrid digital noise cancelling and a hear-through mode.

Spezifikationen

  • Modellbezeichnung

    ATH-S220BT

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    On-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    32 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    105

  • Impedanz (Ohm (1 kHz))

    32

  • Wiedergabedauer (hours)

    Approx. 60 hours continuous use (music playback)

  • Gewicht (g)

    180

  • Offizieller Link