Hifiverse

Kopfhörerverstärker - McIntosh MHA200 75th Anniversary Edition

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MHA200 75th Anniversary Edition
Bildquelle - (c) McIntosh

The MHA200 75th Anniversary Edition is a short run of the McIntosh MHA200 two-channel vacuum tube headphone amplifier, issued in 2024 for the 75th anniversary of McIntosh Laboratory of Binghamton, New York. Its first 75 units carry the hand signature of McIntosh President Charlie Randall, and the price was USD 2,800. McIntosh now lists the MHA200 as retired with limited availability, with a 3-year limited warranty.

Key specs that matter

Rated output is 500 mW across four headphone impedance ranges - 32 - 100, 100 - 250, 250 - 600 and 600 - 1,000 ohms. Harmonic distortion is 0.5% maximum at any power level from 250 mW to rated power, 20 Hz - 20 kHz. Intermodulation distortion is 0.04% typical, 0.4% maximum. Frequency response is 20 Hz - 20 kHz (+0, -0.5 dB), signal-to-noise ratio is 94 dB, dynamic headroom 1.5 dB and damping factor above 150. Voltage gain is 12 dB at 32 ohms, 17 dB at 100 ohms, 21 dB at 250 ohms and 25 dB at 600 ohms. Input sensitivity is 1.0 Vrms unbalanced and 2.0 Vrms balanced, with 10k and 20k ohms input impedance and 8 V and 16 V maximum input. Dimensions are 156 x 146 x 232 mm (W x H x D), and weight is 4.8 kg.

Engineering and use context

A pair of 12AT7 dual triodes amplifies the incoming signal, and a pair of 12BH7A dual triodes provides the power to drive the headphone output. Two Unity Coupled Circuit output transformers follow, the technology McIntosh was founded on in 1949 and still uses in the MC275 and MC1502 power amplifiers. McIntosh designed these transformers to match the tube section to the headphone output. Rather than adapting voltage gain in the input stage, their secondary windings make full power available for every load setting, chosen with the front LOAD knob. Supply comes from a custom toroidal power transformer with low mechanical hum and a low magnetic field.

Its chassis is custom formed stainless steel with a polished mirror finish, with a die-cast aluminium McIntosh name badge on the side. A protective tube cover is included. Power Control input and output switch it on and off with other McIntosh components, and the US version draws 1.5 A at 120 V.

Pairing

Headphone outputs are a pair of 3-pin balanced XLR for dedicated left and right channels, a 4-pin balanced XLR and a 6.35 mm stereo jack. One balanced and one unbalanced input accept a source with fixed output, with the VOLUME knob setting level. With a variable-output source, the VOLUME knob is set to its centre Unity Gain point.

Alternatives

The McIntosh MHA50 is a smartphone-sized portable headphone amplifier with a built-in DAC and Bluetooth input.

Spezifikationen

  • Modellbezeichnung

    MHA200 75th Anniversary Edition

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    500

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    25

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.5

  • Signal-Rausch-Abstand (dB)

    94

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    0.4

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    <100

  • Abmessungen (mm)

    156 x 146 x 232

  • Gewicht (kg)

    4.8

  • Offizieller Link

Weitere Komponenten