Hifiverse

Kopfhörerverstärker - McIntosh MHA50

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MHA50
Bildquelle - (c) McIntosh

The MHA50 Portable Decoding Amplifier is a smartphone-sized headphone amplifier with a built-in DAC from McIntosh Laboratory of Binghamton, New York. It was announced on 27 September 2017 at USD 700, with a UK price of GBP 895. McIntosh lists a production period of 2017 - 2025 and now files it as a legacy product.

Key specs that matter

Headphone power output is 200 mW, and the supported headphone load impedance is 8 - 600 ohms. THD is 0.005% maximum. Frequency response is 20 Hz - 50 kHz (+0, -0.5 dB), and signal-to-noise ratio is 105 dB below rated output (A-weighted). Its 32-bit DAC accepts PCM at 16, 24 and 32 bits up to 192 kHz, DSD64, DSD128 and DXD at 352.8 kHz and 384 kHz, with asynchronous USB audio. Inputs are one USB Type A, one USB micro B and Bluetooth A2DP with AAC and aptX. A single 3.5 mm output serves headphones or line-input devices. The internal 3,000 mAh lithium battery charges from 5 V DC at 0.7 A. Dimensions are 70 x 155 x 14 mm (W x H x D), and weight is 0.2 kg.

Engineering and use context

The USB Type A input is for Apple iOS devices only. Android devices with USB On-The-Go, Windows PCs and Mac computers connect to the USB micro B input, which also recharges the battery. McIntosh offers a USB Audio driver for Windows 7, 8, 8.1 and 10. According to McIntosh, a charge gives up to 6 hours of playback over Bluetooth and longer over the wired connections.

On the top end sit a GAIN switch with Low and High settings, an HXD on/off switch and a Bluetooth push-button. HXD is the McIntosh Headphone Crossfeed Director, which McIntosh says restores the directionality component of the spatial sound stage heard with loudspeakers. Level is set by a rotary touch-sensitive volume control styled after the classic McIntosh knob, next to a touch standby control and an operation-mode indicator.

Supplied in the box are a leather carrying case, a Lightning to USB-A cable, USB micro-B to USB-A, micro-B to micro-B and micro-B to USB-C OTG cables, and a wall charger with a USA plug and adapters for Europe and Japan.

Pairing

The GAIN switch matches the output to the sensitivity and impedance of the headphones or the line-input device. A source with USB audio output or Bluetooth with aptX or AAC is required. McIntosh names its MHP1000 headphones as the companion product.

Alternatives

The McIntosh MHA200 is a mains-powered two-channel headphone amplifier with 12AT7 and 12BH7A tubes and Unity Coupled Circuit output transformers.

Spezifikationen

  • Modellbezeichnung

    MHA50

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    200

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.005

  • Signal-Rausch-Abstand (dB)

    105

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    <600

  • Abmessungen (mm)

    70 x 155 x 14

  • Gewicht (kg)

    0.2

  • Offizieller Link