Hifiverse

Kopfhörerverstärker - Lehmann Audio Linear SE

Beschreibung, Bilder, technische Daten und Spezifikationen

Lehmann Audio Linear SE
Bildquelle - (c) Lehmann Audio

The Linear SE is a headphone amplifier from Lehmann Audio, now in its mk II version, which Lehmann places in the reference class. Its housing was developed by product designer Guido Gutenstein and has a silk-flat aluminium finish in silver or black. Housing and faceplate versions can be combined with freely selectable LED colours. The Linear II mainboard from Lehmann uses improved components of the Linear SE board.

Key specs that matter

Output power is 400 mW into 60 ohms and 200 mW into 300 ohms. Maximum gain is selectable via DIP switches at 0, 10, 18 or 20 dB. Frequency response is 10 Hz (-0.3 dB) to 35 kHz (-1 dB). Signal-to-noise ratio is above 100 dB at 0 dB gain, THD is below 0.001% at 6 mW/300 ohms and channel separation exceeds 70 dB at 10 kHz. Input impedance is 47 kohms. At the phones outputs the output impedance is 5 ohms, and at the pre-out it is 60 ohms. Power consumption is 10 W. The housing measures 120 x 296 x 59 mm (W x D x H) and weighs 2.2 kg net.

Engineering and use context

Lehmann uses components from selected manufacturers throughout. Mundorf capacitors are used in the power supply and also in the signal path, and an ahp fuse and Mogami cables are standard. The analogue board is a thoroughly revised design in Low-Z Copper.

Connections are two phones outputs on Neutrik headphone jacks with gold-plated contacts, one pre-out and gold-plated RCA sockets with Teflon insulation. Two digital options are offered. A USB DAC (384 kHz/32-bit) gives priority to the USB input over the analogue line input. A TOSLINK/S/PDIF DAC (192 kHz/24-bit) prioritises the Toslink input first, then the digital RCA input, then the analogue line input.

Vibration-absorbing SSC feet are standard on the mk II, and 3S Device Feet are available in black or silver.

Pairing

The pre-out connects to a power amplifier or active loudspeakers. A computer connects over USB only with the USB DAC option. Digital sources with Toslink or coaxial outputs require the TOSLINK/S/PDIF DAC option.

Alternatives

The Linear D is Lehmann's smaller headphone amplifier, with a built-in ESS Sabre DAC in a 110 x 280 x 44 mm housing.

Spezifikationen

  • Modellbezeichnung

    Linear SE

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    400 (60 Ohms)

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    200

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35 000

  • Verstärkung (dBu)

    0, 10, 18, 20

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    < 0.001

  • Signal-Rausch-Abstand (dB)

    >100

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    pre-out 60: phones out: 5

  • Abmessungen (mm)

    120 x 296 x 59

  • Gewicht (kg)

    2.2

  • Offizieller Link

Weitere Komponenten