Hifiverse

Sonstige Geräte - Line Magnetic Audio LM-755A

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio LM-755A
Bildquelle - (c) Line Magnetic Audio

The LM-755A is a 200 mm (8 inch) cobalt magnet drive unit from Line Magnetic Audio of Foshan, listed in the company's Horn Units range and sold as a bare driver. Line Magnetic bases it on the Western Electric WE755A and says it developed its own techniques for the paper cone and the paper pulp from which the cone is made. The original 755A was introduced in 1947, appeared in Western Electric catalogues in 1948 alongside the 756A, 728B and 754A, and was installed in railway stations, broadcast studios, office buildings and school public-address systems.

Key specs that matter

Frequency response is 70 Hz - 13 kHz, and sensitivity is 92 dB. Rated power is 6 W. Resonance frequency is 68 Hz, and nominal impedance is 4 ohms.

Engineering and use context

A cobalt permanent magnet is used in the motor, and the LM-755A connects to an amplifier as a passive driver with no excitation supply. Its sister model, the LM-755, is a field-coil unit that requires DC 200 V at 50 mA from a separate excitation power supply. The 4 ohm rating follows the original alnico 755A, whereas the later ceramic 755C of around 1961 and the ferrite 755E of around 1969 moved to 8 ohms.

On the Western Electric original the cone was vacuum formed from a pulp that contained silk and cotton. Western Electric stopped making the 755A in late 1949, when production passed to Altec Lansing.

Used alone as a full-range unit, the LM-755A has no crossover network between the amplifier and the voice coil.

Pairing

A low-powered amplifier, such as a single-ended tube amplifier with a 4 ohm output tap, is required. An enclosure designed for an 8 inch full-range unit is needed.

Alternatives

The Line Magnetic LM-755 is the field-coil version of this 8 inch unit, with the same 70 Hz - 13 kHz response and an 8 ohm rating.

Spezifikationen