Hifiverse

Sonstige Geräte - Line Magnetic Audio LM-594

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio LM-594
Bildquelle - (c) Line Magnetic Audio

The Line Magnetic LM-594 is a compression driver for horn-loaded loudspeaker systems. Its passband covers both the midrange and the treble, and on a suitable horn one LM-594 covers both bands without a separate tweeter, with one crossover point fewer in a multi-way system.

Key specs that matter

Frequency range is 600 Hz - 20 kHz. Nominal impedance is 16 ohms, and rated power is 25 W. Line Magnetic lists the 594 among the field-coil units of its PR-5 Vacuum Tube Excitation Power for low-voltage field-coil speakers, with one unit on the low terminal or two on the high terminal, and of the PR-22 combined supply.

Pairing

A horn with a cutoff well below 600 Hz and a crossover to a separate bass section are required. The 16 ohm load needs a matching output tap on a tube amplifier and the corresponding component values in the crossover. A low-voltage excitation supply such as the PR-5 is required.

Alternatives

The Line Magnetic LM-555 Alto Drive is a field-coil midrange driver rated at 600 Hz - 7 kHz and 6 W.

Spezifikationen