Hifiverse

Vorverstärker - Chord ULTIMA PRE 3

Beschreibung, Bilder, technische Daten und Spezifikationen

Chord ULTIMA PRE 3
Bildquelle - (c) Chord

The ULTIMA PRE 3 is a five-input stereo preamplifier from Chord Electronics in the ULTIMA range. Chord describes it as an all-new, ground-up design with its latest proprietary power supply technology and circuit design. Its fascia was redesigned around a central circular power sphere, flanked by a new volume control and a balance/AV bypass selector with a new knob design.

Key specs that matter

Inputs are two stereo balanced XLR and three stereo unbalanced RCA, plus one stereo balanced XLR AV bypass input. Outputs are one stereo XLR and one stereo RCA. Frequency response is 10 Hz - 200 kHz (±3 dB), THD is 0.002% (20 Hz - 20 kHz) and signal-to-noise ratio is -105 dB on all inputs. Input impedance is 100 kohm and output impedance 560 ohms. Maximum input voltage is 10 V RMS, maximum output voltage 17 V RMS, gain is x1 and channel separation is 100 dB. Power consumption is 40 W from 80-250 V AC with auto-switching. With the included Integra legs it measures 13 x 48 x 34 cm (H x W x D), and weight is 12.7 kg.

Engineering and use context

Inside are an HF switch mode power supply, fully balanced circuitry and an analogue signal path, with a Blue Velvet ALPS potentiometer for volume. Each input is individually buffered and selectively filtered against radio frequency interference. Cooling is by convection, and the solid aluminium chassis carries a top light ring.

Pushing the volume knob selects the five inputs in turn, each indicated by a coloured light around the control. The balance and AV bypass functions share one knob, and in AV bypass mode the volume control and signal processing are bypassed. On the rear panel are a 5 V/3 A USB Type-A power output for Mojo, Mojo 2, Qutest, Hugo 2 and other USB devices, a 12 V trigger input and output and a grounding post. An IR system remote is included, and Chord offers Argent silver or Jett black Integra legs and gloss black acrylic side blocks, which reduce the height to 10 cm and the width to 42 cm but cannot be stacked. The warranty is five years.

Pairing

The matching power amplifiers are the ULTIMA 6 and ULTIMA 3. Both outputs, XLR and RCA, connect to power amplifiers or active speakers. An AV processor or receiver connects to the XLR AV bypass input.

Alternatives

The ULTIMA PRE is Chord's flagship preamplifier, with eight inputs and three outputs in a double-height chassis.

Spezifikationen

  • Modellbezeichnung

    ULTIMA PRE 3

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    1

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    105

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.002

  • Abmessungen (mm)

    130 x 480 x 340

  • Gewicht (kg)

    12.7

  • Offizieller Link

Weitere Komponenten