Hifiverse

Vorverstärker - Vincent SA-T7 Diamond

Beschreibung, Bilder, technische Daten und Spezifikationen

Vincent SA-T7 Diamond
Bildquelle - (c) Vincent

The SA-T7 Diamond is a stereo tube preamplifier in the tubeLine series of Vincent, the German brand founded in 1995, and a special edition of the SA-T7MK, its reference preamplifier. Vincent developed it together with its designer, Dipl.-Ing. Frank Blöhbaum. The difference lies in the tube complement, original Telefunken tubes of German production. A rhombus fused into the glass base, known to collectors as the diamond, is the counterfeit-proof mark of a genuine Telefunken tube. Vincent has said that no further Diamond units will be built once its stock of these tubes is used up.

Key specs that matter

Frequency response is 10 Hz - 100 kHz (±0.1 dB) and rated output voltage is 3 V. THD is below 0.001% (1 kHz, 2 V rms output into 10 kohms). Gain is typically 13.3 dB at maximum volume, and input sensitivity is 430 mV for 2 V output. Signal-to-noise ratio is typically above 100 dB (A), and input impedance is above 22 kohms. Inputs are six stereo RCA, one optical, one coaxial and Bluetooth. Outputs are two stereo RCA pre-outs, one stereo RCA rec out and two 3.5 mm power control jacks. Tube complement is four Telefunken PCF803 and one 85A2. Maximum power consumption is 58 W. The unit measures 430 x 135 x 370 mm (W x H x D), weighs 8.5 kg and comes in black or silver.

Engineering and use context

Circuit topology is a BestPentode transconductance preamplifier, a structure Frank Blöhbaum developed exclusively for Vincent. Four Telefunken PCF803 sit at the heart of this circuit, and Vincent says they were selected for their particular gain characteristic. An 85A2 completes the tube complement.

Digital sources connect through the optical and coaxial inputs or over Bluetooth, for which an antenna is supplied, and the playable formats are WAV, FLAC, APE, LPCM, MP3, AAC, AC3 and WMA. On the front panel there are bass and treble controls, and when TONE is deactivated the signal bypasses them. A rotary selector chooses between the inputs. In the box are a VRC-13 remote control, a Toslink optical cable, a stereo RCA cable, a cable for the power control link and a power cable.

Pairing

Two pre-outs allow a stereo power amplifier plus an active subwoofer, or two power amplifiers for bi-amping. The matching power amplifiers are Vincent's SP-T700 and SP-332, switched on and off over the power control jacks. A turntable requires an external phono stage.

Alternatives

The SA-T7MK is Vincent's regular-production stereo tube preamplifier and the base model of the Diamond edition.

Spezifikationen

  • Modellbezeichnung

    SA-T7 Diamond

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    6

  • Analogausgänge (symmetrisch)

    N/A

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    N/A

  • Eingangsempfindlichkeit (mV)

    430

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    22 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    >100

  • Klirrfaktor + Rauschen (THD+N) (%)

    <0.001

  • Abmessungen (mm)

    430 x 135 x 370

  • Gewicht (kg)

    8.5

  • Offizieller Link

Weitere Komponenten