The ATC-6 is a tube preamplifier with a line stage only, made in Japan by Air Tight, and it succeeds the ATC-3 line stage of 1998. Air Tight has made preamplifiers for almost 40 years. Its five line inputs, two of them XLR, are intended for digital sources such as CD, SACD and high-resolution files as well as for analogue sources. The case keeps the traditional Air Tight design but is more compact overall. Each unit is handmade and hand-wired point to point.
Key specs that matter
Tube complement is two 12AT7 double triodes. Inputs are three RCA pairs and two XLR pairs. Outputs are two RCA pairs, with XLR available on request. Frequency response is 20 Hz - 100 kHz (-1 dB). Input impedance is 100 kohms, and gain is 18 dB. Power consumption is 50 VA. Dimensions are 400 x 90 x 290 mm (W x H x D), and weight is 8.3 kg.
Engineering and use context
In its line amplifier section the ATC-6 has a two-stage configuration with one 12AT7 double triode per stage. Strictly regulated decoupling circuits are placed at each stage to minimise interference between the sections. Its tubes are selected for low noise and stability. Film resistors with a low temperature coefficient, audio-grade resistors and audio PP film capacitors are used, and the copper cable is chosen for each section.
The flat amplifier board is mounted on a pure copper substrate. An inner chassis of 1.0 mm steel plate carries the tube sockets and other mechanical parts. It is coated to reduce resonance and bolted firmly to the main chassis, a frameless monocoque of 1.6 mm steel with a metallic paint finish. AXISS Europe, the German distributor, lists the housing construction as diamagnetic.
Volume is set by a gold-plated multi-contact ALPS control in a milled brass housing. A mode selector covers the two output channels and also supports mono sources. On the front panel is a mute switch labelled Operate, and at switch-on a timed relay mutes the output stage to protect the power amplifier from switch-on currents.
Pairing
A power amplifier with an input impedance above 47 kohms is required. All inputs are line level, so a turntable requires a separate phono stage such as the Air Tight ATE-3011. Both RCA outputs allow a second power amplifier to be connected.
Alternatives
The Air Tight ATC-7 is the larger line-control amplifier of the brand, with two 12AX7 and two 12AU7 tubes in a 145 mm high chassis weighing 13.5 kg.