Hifiverse

Endstufen Stereo - Analog Domain The Athene

Beschreibung, Bilder, technische Daten und Spezifikationen

Analog Domain The Athene
Bildquelle - (c) Analog Domain

The Athene is a power amplifier of the DX9 range from Analog Domain Audio GmbH, the company Angel Despotov founded in Munich in early 2010 and which now designs and manufactures in Taufkirchen, Germany. It is housed in the M4 chassis and has the same high-current output stage as the Apollo, the most powerful DX9 model. Analog Domain designed it for full range amplification with sustained high output, and it can drive any channel of a split system.

Key specs that matter

Peak power output is 2 kW into 8 ohms and 4 kW into 4 ohms, and the amplifier is 2 ohm stable with a minimum rated load of 4 ohms. Peak output voltage is 126 Vac (±179 Vpp), and peak output current is 120 A. Input sensitivity is 1.55 Vrms at an input impedance of 10 kohm. Voltage gain is +38 dB or +26 dB, switch-selectable. Frequency range is 1 Hz - 100 kHz, with full-power bandwidth of 5 Hz - 25 kHz. THD+N is below -92 dB (0.0025%), output noise is below 40 µVrms, and dynamic range exceeds 126 dB linear and 132 dB A-weighted. Damping factor is above 1000. Dimensions are 440 x 298 x 545 mm (W x H x D), and weight is about 75 kg.

Engineering and use context

In the output stage, 100 audio-grade power transistors give a peak current capacity of 720 A. Each DX9 amplifier is a fully symmetrical bridged design with two identical power stages operating in inverse phase. Outputs are massively parallel, using hand-matched transistors kept well within their linear region. Only discrete components sit in the signal path, and no operational amplifiers are used.

Drive and control come from the DX901 hybrid chip, a custom IC with discrete components on a ceramic substrate. Its DXDrive bias circuit uses no thermal sensing. Instead, it monitors the idling current directly and holds bias at the set level regardless of temperature, supply voltage or load. At the input sits a zero-feedback discrete complementary unity-gain buffer, with XLR or RCA chosen by a sealed relay with gold-plated silver contacts, and a limiter that engages only on overload.

Power comes from an in-house designed toroidal transformer that supplies several voltages to the power stages for high output and efficiency. Protection covers mains over- and under-voltage, overheating, input overdrive, output short circuit, DC at the output and excessive HF/RF, with a soft-start circuit at power-up. Chassis parts are machined from solid aluminium, and a transferable ten-year warranty applies.

Pairing

A preamplifier with XLR balanced or RCA unbalanced outputs is required. The 12 V trigger input and output use 3.5 mm jacks.

Alternatives

The Analog Domain Apollo uses the same M4 chassis and output stage and is rated at 4 kW into 8 ohms peak, with +41 dB or +26 dB gain.

Spezifikationen

  • Modellbezeichnung

    The Athene

  • Eingangsempfindlichkeit (mV)

    1550

  • Eingangsimpedanz (symmetrisch) (Ω)

    10 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2000

  • Ausgangsleistung (4Ω) (W)

    4000

  • Verstärkung (dBu)

    38

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.0025

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440 x 298 x 545

  • Gewicht (kg)

    75

  • Offizieller Link