Hifiverse

Endstufen Stereo - Chord SUZI AMP

Beschreibung, Bilder, technische Daten und Spezifikationen

Chord SUZI AMP
Bildquelle - (c) Chord

The Suzi Amp is a modular stereo power amplifier from Chord Electronics of Kent, England, and belongs to the Hugo range. It uses Chord's ULTIMA amplifier topology in a compact case. Black and silver finishes are offered, and the warranty is three years.

Key specs that matter

Power output is 30 W into 8 ohms, and maximum output voltage is 15 V RMS into 8 ohms. Maximum input voltage is 3 V RMS. THD is 0.01% and signal-to-noise ratio is 116 dB. Inputs are two RCA sets, one of them reserved for the Hugo 2. Outputs are one pair of 4 mm banana loudspeaker sockets and a 12 V DC jack, and the unit runs on 80 - 250 V mains. Dimensions are 215 x 100 x 69 mm (L x W x H).

Engineering and use context

On top of the case sits a removable solid aluminium cover block. With the block removed, the Suzi Pre or the Hugo 2 slides onto the amplifier and its outputs plug straight into the Suzi Amp's inputs, and a supplied locking plate or charging bridge assembly holds the units together. Chord lists four core configurations - the Suzi Amp with an existing preamplifier, with the Suzi Pre as an analogue pre/power amplifier with phono stage, with the Hugo 2 and USB multiplexer as a DAC/amplifier, and with the Hugo 2 and 2go as a streaming DAC/amplifier.

In the streaming configuration the system gains Roon Endpoint and DLNA/UPnP connectivity and up to 2 TB of storage on the twin microSD slots of the 2go. The USB multiplexer, sold separately, adds USB-B data and USB-C data and charging inputs to the Hugo 2. A charging bridge assembly powers the Hugo 2 while the Suzi Amp is off and has a high-current 5 V USB-C output.

Polychromatic buttons on the front control power and the AV bypass feature, which engages the rear RCA inputs. A headphone pass-through with 3.5 mm and 6.35 mm sockets is active when the Suzi Pre or Hugo 2 is connected, and both sockets can be used at once. The case has venting and works as a heatsink. On the rear panel are also a grounding post, a 12 V power input and a 5 V Micro USB socket for the charging bridge.

Pairing

The matching preamplifier is the Suzi Pre. A preamplifier or source with variable output connects through the RCA inputs with AV bypass engaged. Loudspeakers connect with 4 mm banana plugs.

Alternatives

The BerTTi is a larger ULTIMA stereo power amplifier from Chord Electronics.

Spezifikationen

  • Modellbezeichnung

    SUZI AMP

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    30

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    116

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.01

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten