Hifiverse

Endstufen Stereo - Chord SPM 1050 MKII

Beschreibung, Bilder, technische Daten und Spezifikationen

Chord SPM 1050 MKII
Bildquelle - (c) Chord

The SPM 1050 MkII is a 200 W stereo power amplifier in Chord Electronics' Signature range. Chord positions it above the entry-level SPM 650, and the MkII version has a new vented aluminium lid. The model has since been discontinued, and Chord points to the Ultima 6 as the newer version.

Key specs that matter

Output is 200 W RMS per channel into 8 ohms at 0.05% distortion. Frequency response is 0.2 Hz - 46 kHz (-1 dB), and signal-to-noise ratio is better than -82 dB. Channel separation is better than 95 dB. Input impedance is 100 kohms on both balanced and unbalanced inputs, with input capacitance below 30 pF. Gain is 30 dB, slew rate is 70 V/µs (1 kHz, 20 V square wave), and output inductance is 2.6 µH. Inputs are one stereo pair of gold-plated balanced XLR and one stereo pair of gold-plated unbalanced RCA. Dimensions are 420 x 355 x 133 mm (W x D x H) without Integra legs, and weight is 17 kg.

Engineering and use context

Each channel has four of Chord's proprietary lateral-structure dual-die MOSFETs as output devices, eight in total. Power comes from Chord's proprietary 2 kW high-frequency switch-mode power supply. Stability is specified as unconditional. The amplifier is convection cooled and is built in a solid aluminium chassis.

On the rear panel, one pair of high-current, gold-plated loudspeaker terminals is provided. Chord offers the Integra legs in Argent silver, Jett black or Nickel, and a gloss black acrylic side block can replace the aluminium Integra legs.

Pairing

A preamplifier with balanced XLR or unbalanced RCA outputs is required. A source with a variable output, such as a DAC with its own volume control, can also be connected directly.

Alternatives

The Chord SPM 650 is the entry-level stereo power amplifier below the SPM 1050 MkII in the Signature range.

Spezifikationen

  • Modellbezeichnung

    SPM 1050 MKII

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0.2

  • Obere Grenzfrequenz +/- 3dB (Hz)

    46 000

  • Signal-Rausch-Abstand (dB)

    82

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    133 х 420 х 355

  • Gewicht (kg)

    10

  • Offizieller Link

Weitere Komponenten