Hifiverse

Endstufen Stereo - Air Tight ATM-2Plus

Beschreibung, Bilder, technische Daten und Spezifikationen

Air Tight ATM-2Plus
Bildquelle - (c) Air Tight

The ATM-2Plus is a stereo power amplifier from Air Tight, the Japanese manufacturer founded in 1986 by Atsushi Miura, with KT88 output tubes in push-pull. Air Tight released the original ATM-2 in 1988, and it became the company's longest-running power amplifier model, in the catalogue for over 30 years. The ATM-2Plus is a completely new design that keeps the exterior design of its predecessor.

Key specs that matter

Tube complement is two 12AX7, four 6CG7 or 6FQ7 and four KT88 or 6550, with fixed bias on the output tubes. Rated power output is 70 W + 70 W (1 kHz). Frequency response is 10 Hz - 60 kHz (-1 dB, 1 W) and 20 Hz - 50 kHz (-1 dB, 50 W). Input impedance is 100 kohms. Two RCA inputs are provided, one on the back and one on the front, with an input selector switch. Load impedance taps are 4 ohms (Low) and 8 ohms (High), with 16 ohms as an option. Bias adjustment is provided. Dimensions are 415 x 380 x 230 mm (W x D x H), and weight is 33 kg.

Engineering and use context

All circuitry, including the first and second amplification stages, and the internal construction were renewed. Because vintage KT88 tubes are now almost impossible to obtain and modern tubes differ in quality, Air Tight lowered the plate voltage of the output tubes while keeping the output power, for longer tube life and stable operation. To set the optimum operating point of the KT88/6550, the 12AU7 of the original was replaced by 6CG7/6FQ7 tubes, which Air Tight specifies for wider amplitude and lower distortion. Negative feedback was redesigned to optimise the damping factor for current loudspeakers.

New Tamura 100 W class output transformers are mounted, larger than the amplifier's rating, to give surplus at low frequencies. The power transformer is custom-made, hand-wound and paper-wrapped by a Japanese craftsman. Its new chassis hides the fasteners with stud bosses and ensures firm frame grounding, and fast-breaking fuses protect the amplifier against output tube failure.

No printed circuit boards are used. All assembly and wiring is done by Air Tight craftsmen at the factory in Takatsuki, Osaka.

Pairing

A preamplifier with RCA outputs is required, and Air Tight's own range includes the ATC-5. Its output taps allow 4 ohm and 8 ohm loudspeakers, or 16 ohm models with the optional tap.

Alternatives

Within the Air Tight catalogue, the ATM-1S is a stereo power amplifier with EL34 output tubes in push-pull.

Spezifikationen

  • Modellbezeichnung

    ATM-2Plus

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 70

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    60 000

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    415 x 380 x 230

  • Gewicht (kg)

    33

  • Offizieller Link

Weitere Komponenten