Hifiverse

Endstufen Stereo - Air Tight ATM-1S

Beschreibung, Bilder, technische Daten und Spezifikationen

Air Tight ATM-1S
Bildquelle - (c) Air Tight

The Air Tight ATM-1S is a stereo tube power amplifier using four 6CA7/EL34 output tubes, two 12AU7 and one 12AX7.

Key specs that matter

Output is 36W per channel into 8 ohms, with 4, 8 and 16 ohm load settings changed by internal wiring (8 ohms from the factory). Input sensitivity is 1V and input impedance 100k ohms. Frequency response is 20Hz to 20kHz within 1dB. Distortion is 0.1% at 1kHz and 1W, rising to 1% at the full 36W, while S/N reaches 100dB A-weighted. The chassis measures 368 mm wide, 293 mm deep and 231 mm tall, and weighs 22 kg.

Pairing

With its moderate output from EL34 tubes, the ATM-1S suits loudspeakers of reasonable sensitivity rather than difficult low-impedance loads.

Alternatives

Air Tight also offers the ATM-1 2024 edition, a later stereo EL34 power amplifier rated at 35W per channel.

Spezifikationen

  • Modellbezeichnung

    ATM-1S

  • Eingangsempfindlichkeit (mV)

    1000

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 36

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    368 × 293 × 231

  • Gewicht (kg)

    22

  • Offizieller Link

Weitere Komponenten